Kenmore ELITE W10215709A User Manual download pdf (Page 13)

• PressandholdLOCKfor3secondstolockthedispenser.

• PressandholdLOCKasecondtimetounlockthedispenser.

Thedisplayscreenindicateswhenthedispenserislocked.

locked unlocked

LOCKED UNLOCKED

The water filter status light will help you know when to change

your water filter. When the water filter status display changes

from "GOOD" to "ORDER," this tells you that it is almost time to

change the water filter cartridge. Replace the water filter

cartridge when the water filter status display changes to

"REPLACE." If water flow to your water dispenser or ice maker

decreases noticeably, change the filter sooner. The filter should

be replaced at least every 6 months depending on your water

quality and usage. To change the filter, see "Water Filtration

System."

INDICATOR: STATUS:

NEW or GOOD (green) New filter installed

ORDER (yellow) Order filter

REPLACE (red) OR Replace water filter

when water flow decreases

After changing the water filter, reset the status light by pressing

and holding the FILTER button for 3 seconds. The status light will

change from Replace (red) to New/Good (green) when the system

is reset.

Style 1 Style 2

ew GOOD

good

order ORDER

replace REPLACE

PRESS & HOLD

TO RESET Filter Status

A. Eject button

B. Filter cap

2. Remove the cap by turning it counterclockwise until it stops.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

3. Take the new cartridge out of its packaging and remove the

covers from O-rings.

A. Cover

B. O-ring

Place the cap (removed in Step 2) on the new filter. Align the

ridge on the cap with the arrow on the filter. Turn the cap

clockwise until it snaps into place.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

Changing the Water Filter

The water filter is located in the base grille below the freezer

compartment door. It is not necessary to remove the base grille

to remove the filter.

1. Remove the filter by pressing the eject button and pulling

straight out on the filter cap.

NOTES:

• Avoid twisting the cap when removing the filter because

this could cause the cap to come off. If this occurs,

replace the cap and pull the filter straight out.

A. Eject button

B. Arrow on filter

C. Ridge on cap

5. Push the new filter into the opening in the base grille. As the

filter is inserted, the eject button will depress. The eject

button will pop back out when the filter is fully engaged.

6. Pull gently on the cap to check that the filter is securely in

place.

7. Flush the water system. See "Flushing the Water System

After Changing Filter."

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 83 84

Comments to this Manuals

No comments

Kenmore ELITE W10215709A User Manual Page 13

Comments to this Manuals

Related products and manuals for Fridges Kenmore ELITE W10215709A