Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR Owner's Manual download pdf (Page 20)

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use

abrasive or harsh cleaners, or cleaners designed for stainless

steel. Dry thoroughly with a soft cloth. Additionally, to avoid

damage to painted metal exteriors, apply appliance wax

(or auto paste wax) with a clean, soft cloth. Do not wax

plastic parts.

Brushed aluminum: Wash with a clean sponge or soft cloth

and a mild detergent in warm water. Do not use abrasive or

harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

Ultra Satin™ (stainless look) finish: Wash with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners, or cleaners designed for

stainless steel. Dry thoroughly with a soft cloth.

Stainless steel finish: Wash with a clean sponge or soft cloth

and a mild detergent in warm water. Do not use abrasive or

harsh cleaners. Dry thoroughly with a soft cloth.

■ To keep your stainless steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer’s approved Stainless Steel

Cleaner and Polish. To order the cleaner, see

“Accessories.”

IMPORTANT: This cleaner is for stainless steel parts only!

■ Do not allow the Stainless Steel Cleaner and Polish to

come into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If unintentional

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. Dry thoroughly with a soft

cloth.

5. If your model has a touch screen display on the dispenser

panel, clean the screen using a soft, lint-free cloth. Mix a

mild detergent with water, then use the mixture to dampen

the cloth and gently wipe the screen.

■ To avoid unintentionally changing settings, make sure the

refrigerator is unplugged or the power is disconnected

before wiping the screen.

■ Do not over-saturate the cloth. Do not spray or wipe

liquids directly onto the screen. Do not use abrasive or

harsh cleaners such as window sprays, scouring

cleansers, flammable fluids, cleaning waxes,

concentrated detergents, nail polish remover, bleaches

or cleansers containing petroleum products. Do not use

paper towels, scouring pads, or other harsh cleaning

tools. These can scratch or damage materials.

6. There is no need for routine condenser cleaning in normal

home operating environments. If the environment is

particularly greasy or dusty, or there is significant pet traffic

in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency.

If you need to clean the condenser:

■ Remove the base grille. See “Base Grille” graphic or

“Base Grille” section.

■ Use a vacuum cleaner with a soft brush to clean the

grille, the open areas behind the grille and the front

surface area of the condenser.

■ Replace the base grille when finished.

7. Plug in refrigerator or reconnect power.

Lights

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure

to replace the bulb with one of the same size and shape.

■ The dispenser lights are LEDs that cannot be changed.

■ On some models, the interior lights are LEDs that cannot

be changed.

■ On some models, the interior lights require a 40watt

bulb.

1. Unplug refrigerator or disconnect power.

2. Remove light shield when applicable, as explained in the

following sections.

NOTE: To clean the light shield, wash it with warm water

and liquid detergent. Rinse and dry the shield well.

3. Remove light bulb and replace with one of the same size,

shape and wattage.

4. Replace light shield when applicable, as shown.

5. Plug in refrigerator or reconnect power.

Crisper Lights

■ If necessary, remove the top crisper drawer for easier access

to the crisper light shield. Remove the light shield by

squeezing the top and bottom in toward the center and

pulling the bottom tabs out of the refrigerator liner, then

sliding the top tabs down and out.

■ Replace the light shield by sliding the top tabs up into the

slotted holes in the refrigerator liner, then snapping the

bottom tabs into place. If necessary, replace the top crisper

drawer.

Lower Freezer Light (on some models)

■ Remove the light shield by grasping the sides and squeezing

in toward the center. Once the side hooks of shield are free

from the freezer lining, pull down the shield.

■ Replace the light shield by squeezing the sides toward the

center and inserting the side hooks into the slotted holes.

Once the side hooks are in place, snap the front tab into the

slotted hole.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

Comments to this Manuals

No comments

Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Fridges Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR