Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR Owner's Manual download pdf (Page 17)

Removing and Replacing the Ice Storage Bin

1. Lift and hold open the ice maker door.

2. Lift the wire shutoff arm so it clicks into the OFF (up)

position. Release the ice maker door.

3. Lift up the front of the storage bin and pull it out.

4. Replace the bin by pushing it in all the way, or the dispenser

will not work.

5. To restart ice production, lift open the ice maker door and

push the wire shutoff arm down to the ON position.

REFRIGERATOR FEATURES

Your model may have some or all of these features.

Refrigerator Shelves

(number of shelves varies by model)

Store similar foods together and adjust the shelves to fit

different heights. This reduces the time the refrigerator door is

open and saves energy.

To Remove and Replace a Shelf:

1. Pull the shelf forward to the stop. Tilt the front of the shelf

up. Lift to remove from the shelf supports.

2. Replace the shelf/frame by aligning the shelf with the shelf

supports. Slide the shelf onto the shelf supports. Be sure that

the shelf is securely in position.

Deli Drawer

(on some models)

The deli drawer stores raisins, nuts, spreads, and other small

items at normal refrigerator temperatures.

To Remove and Replace the Deli Drawer:

1. Remove the deli drawer by sliding it straight out to the stop.

Lift the front and rear of the drawer up and out of the shelf

supports. Tilt the drawer sideways to remove it from the

refrigerator compartment.

2. Replace the deli drawer by sliding it back past the stop and

pushing it into place.

Convertible Vegetable/Meat Drawer,

Crisper and Covers

(on some models)

Crisper and Convertible Vegetable/Meat Drawers

To Remove and Replace Drawers:

1. Slide crisper or meat drawer straight out to the stop. Lift the

front of drawer with one hand while supporting the bottom

of drawer with the other hand and slide the drawer out the

rest of the way.

2. Replace the crisper or meat drawer by sliding it back in fully

past the drawer stop.

Crisper and Convertible Vegetable/Meat Drawer Covers

To Remove and Replace Covers:

1. Remove the crisper and meat drawer. Press up in center of

crisper glass insert until it rises above the plastic frame.

Holding the crisper glass firmly, slowly slide the glass insert

forward to remove. Lift crisper cover frame and remove.

Repeat steps to remove the meat drawer cover.

2. Replace back of meat drawer cover frame into supports or

slides on side walls of the refrigerator and lower or slide the

front of the cover frame into place. Slide rear of glass insert

into cover frame and lower front into place. Repeat steps to

replace the crisper cover.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

Comments to this Manuals

No comments

Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Fridges Kenmore 25 cu. ft. Side-by-Side Refrigerator w/ SmartSense Cooling Technology - Bisque ENERGY STAR