Kenmore 385.16677 User Manual Page 65
- Page / 90
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Thread Tension (3 threads)
Correct tension
The illustration at right shows sewing results with
correct tension settings. However, adjusting the
thread tension may be required depending on the
type of fabric and thread being used.
(T) Wrong side of fabric
@ Right side of fabric
(3) Right or left needle thread
(4) Upper looper thread
(5) Lower looper thread
Thread tension adjustment
* Set all three thread tension dials at “3”.
Then serge, and check the tension balance.
If the tension balance on the test piece is not
satisfactory, you can adjust the thread tension
with thread tension dial.
(D Thread tension dial
(7) Setting mark
@ Loosen
@ Tighten
Needle thread tension is too loose
The illustration shows sewing results when the
needle thread tension is too loose/
Remedy; ..: .
Tighten needle,;tiiliiliii|i®n.
® Left ne,e||i®fead tension dial
® Right hfiiitf thread tensiorndia!
Looper threadTension is outlol balance (1)
The illustratidn snllis sewipplgiu when the lower
looper thread tehsidn .is .tO:G.;ti;ght and/or upper looper
thread tension is too loose./
Remedy;
Loosen lower looper thread tension and/or tighten
upper looper thread tension.
@ Upper looper thread tension dial
@ Lower looper thread tension dial
Looper thread tension is out of balance (2)
The illustration shows sewing results when the upper
looper thread tension is too tight and/or lower looper
thread tension is too loose.
Remedy;
Loosen upper looper thread tension and/or tighten
lower looper thread tension.
@ Upper looper thread tension dial
@ Lower looper thread tension dial
54
■ • :: lul 'f/ ^ ■
(T: - -
: l-i d
r \ ...
i !
(5) ‘
t t
111
- MAQUINA DE OVERLOOK 1
- MACHINE À SURFILAGE 1
- IMPORTANT SAFETY 2
- INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- CONSERVE ESTAS INSTRUCCIONES 3
- CONSERVEZ CETTE NOTICE 4
- 0E 5
- Machine Specifications 8
- PROTECTION 9
- TABLE OF CONTENTS 10
- TABLE DES MATIERES 12
- SECTION I. NAME OF PARTS 13
- PARTIEL IDENTIFICATION DES 14
- PIÈCES DE LA MACHINE 14
- 3/16 ” pied ganseur 16
- For Your Safety 17
- Polarized Plug 17
- Controlling Serging Speed 17
- Before Using Your Serger 17
- (T) Handwheel 19
- (T) Side cover 19
- (T) Loopercover 19
- Couvercle du houcleur 20
- @ Needle.ff ; 23
- Cambiar la aguja 24
- Changement de l’aiguille 24
- Removing the Presser Foot 25
- Attaching the Presser Foot 25
- MMSl' 25
- Acfjustmentjoi Foot Pressure 25
- Liicoclic 26
- (ioiipiiile 26
- Adjustment of Stitch Length 27
- Marque de réglage 28
- To Deactivate the Upper Knife 29
- To Activate the Upper Knife 29
- Goupille d’arrêt 30
- Cutting width adjusting dial 31
- (2) Lower knife 31
- @ Standard setting 31
- ' ■ inférieur 32
- Hemming) 33
- (4) Cuchilla superior 34
- Threading the Machine 35
- 7) Tableau d’enfilage 36
- 3) Fil d’aiguille 36
- 4) Pied presseur 36
- * Threading the Lower Looper 37
- (T) Guidefil 38
- Plaque guide fil 38
- (T) Boudeur inférieur 42
- (T) Thread guide 43
- (2) Thread guide plate 43
- Guide-fil 44
- Plaque guide-fil 44
- (j) Upper looper 45
- Enfilage de l’aiguille droite 48
- 4, 5, 6, 7 49
- 2) Thread guide plate 51
- Enfilage de l’aiguille gauche 52
- "Si 53
- 9) Aguja izquierda 54
- 7) Guide-fil de Vaiguille 54
- 3d:0bain 55
- Commencer à coudre 56
- Fin de lit couturé-■ y 56
- P.:.::T::PTP;riP::v:fcd: 57
- ■ ... \ : . .. ■: :v. : 57
- Au début 58
- Thread Tension (4 threads) 59
- Tension del hilo (4 hilos) 60
- Tension des fils (4 fils) 60
- La tensión correcta 60
- Bonne tension 60
- 4) Left needle thread 61
- 5) Upper looper thread 61
- ,yï; 62
- (T) Needle on the right 63
- Aiguille droite 64
- Vis de pince-aiguille gauche 64
- Correct tension 65
- Thread tension adjustment 65
- Ajuste de la tensión de! hilo 66
- Tensión del hilo (3 hilos) 66
- Thread and Needle Chart 67
- Cuadro de hilos y agujas 68
- (Pai>e, hlcinc) 72
- Thread Tension 73
- Tensión del hilo 74
- For Better Results 75
- (T) Tissu 76
- (T) Envers du tissu 76
- Thread and Fabric 77
- Machine Setting 77
- Thread and Fabric - ■ 77
- PIN TUCKING 79
- 0.8 irim (3/64") 81
- (4) Cuchilla inferior 82
- Cleaning the'Feed Dog 83
- Remplacement de Vampoule 84
- Oiling the Machine 85
- Transporte de la máquina 86
- Transport de la machine 86
- Troubleshooting 87
- Solución de problemas 88
- COUSU. . a.-i' 89
- (U.s.A.) 90
- (1-888-784-6427) 90
- (1-800-533-6937) 90
Related products and manuals for Sewing machines Kenmore 385.16677
Sewing machines Kenmore 385.166551 User Manual
(113 pages)
(113 pages)
Sewing machines Kenmore 1430 User Manual
(50 pages)
(50 pages)
Sewing machines Kenmore 385.19365 User Manual
(139 pages)
(139 pages)
Sewing machines Kenmore 19501 User Manual
(98 pages)
(98 pages)
Sewing machines Kenmore 385.160201 User Manual
(109 pages)
(109 pages)
Sewing machines Kenmore 19502 User Manual
(18 pages)
(18 pages)
Sewing machines Kenmore 1660 User Manual
(51 pages)
(51 pages)
Sewing machines Kenmore 385.16231 User Manual
(117 pages)
(117 pages)
Sewing machines Kenmore 15/I649 User Manual
(36 pages)
(36 pages)
Sewing machines Kenmore 15358 User Manual
(89 pages)
(89 pages)
Sewing machines Kenmore 385. 19000 User Manual
(134 pages)
(134 pages)
© 2020, manymanuals.com. All rights reserved. | 2.995 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals