Kenmore Washer/Dryer User Manual download pdf (Page 22)

III. MAKE FOUR-WIRE

ELECTRICAL CONNECTION

TO RECEPTACLE

Use a 4-wire power supply cord:

A WARNING

M

Fire Hazard

Use a new UL approved 30 ampere

power supply cord.

Use a UL approved strain relief.

Disconnect power before making

electrical connections.

Connect neutral wire (white or center

wire) to center terminal (silver).

Ground wire (green or bare wire)

must be connected to green ground

connector.

Connect remaining 2 supply wires

to remaining 2 terminals (gold).

Securely tighten all electrical

connections.

Failure to follow these instructions

can result in death, fire, or electrical

shock.

Local codes may permit the use of

a U.L.-listed, 120/240-volt minimum,

30-ampere, dryer power supply cord

kit (pigtail). Power supply cord should

be type SRD or SRDT and be at least

four feet long. The wires that connect

to the laundry center must end with

ring terminals or spade terminals with

upturned ends.

For mobile homes or other four-wire

installations, the power supply cord must

have four, N0.-IO copper wires and

match a four-wire receptacle of NEMA

Type 14-30R. The fourth wire (grounding

conductor) must be identified with a

green cover or bare copper wire and

the neutral conductor by a white cover.

Do not use an extension cord with

this laundry center.

Do not connect plug end of power

supply cord into a live receptacle before

connecting power supply cord to laundry

center terminal block.

Neutral wire

Neutral

I

prong

Four-Wire Power Supply Cord

(Mobile home or other four-wire installations)

Four-wire receptacle

(NEMA Type 14-30R)

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

Comments to this Manuals

No comments