Kenmore Washer/Dryer User Manual download pdf (Page 56)

CLEANING THE LINT SCREEN

Remove Lint Before Every Load

The lint screen is located in the dryer

door opening. Remove lint before every

load. A screen blocked by lint can

increase drying time.

To clean:

STEP 1. Pull the lint screen straight up.

STEP 2. Roll lint off the screen with your

fingers. Do not rinse or wash screen to

remove lint. Wet lint is hard to remove.

STEP 3. Push the lint screen firmly back

into place.

IMPORTANT:

• Do not run the dryer with the lint screen

loose, damaged, blocked, or missing.

Doing so can cause overheating and

(Jamage to both the dryer and fabrics.

• Some towels made of synthetic fibers

and natural fibers (polyester and cotton

t)lends) may shed more lint than other

towels, causing your dryer's lint screen

to fill up faster. Be sure to remove lint

from the lint screen before and after

drying new towels.

Wash Lint Screen As Needed

Laundry detergents and fabric softeners

Ccin cause a residue buildup on the lint

sc reen. Wash the lint screen with a nylon

brush if it becomes clogged due to a

residue buildup.

To clean:

STEP 1. Wet both sides of lint screen

with hot water.

STEP 2. Wet a nylon brush with hot

water and liquid detergent; scrub lint

screen with the brush to remove

residue buildup.

STEP 3. Rinse screen with hot water.

STEP 4. Thoroughly dry lint screen

with a clean towel; replace in dryer.

56

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 65 66

Comments to this Manuals

No comments