Kenmore Washer/Dryer User Manual download pdf (Page 19)

II. THREE-WIRE ELECTRICAL

CONNECTION (DIRECT WIRE)

Prepare cable as directed:

A WARNING

M

Fire Hazard

Use 10 gauge solid copper wire.

Use UL approved strain relief.

Disconnect power before making

electrical connections.

Connect neutral wire (white or center

wire) to center terminal (silver).

Ground wire (green or bare wire)

must be connected to green ground

connector.

Connect remaining 2 supply wires

to remaining 2 terminals (gold).

Securely tighten all electrical

connections.

Failure to follow these instructions

can result in death, fire, or electrical

shock.

The laundry center can be connected

directly to fused disconnect or circuit

breaker box with three-wire, flexible

armored or nonmetallic sheathed

copper cable (with grounding wire). All

current-carrying wires must be insulated.

A conduit connector must be installed at

junction box. Allow four feet of slack in the

line so laundry center can be moved if

servicing is ever necessary.

GROUNDING INSTRUCTIONS

This appliance must be connected to

a grounded metal, permanent wiring i

system; or an equipment-grounding

conductor must be run with the circuit

conductors and connected to the

equipment-grounding terminal or

lead on the appliance.

STEP 1. Disconnect power.

STEP la. Strip 3V2 inches of outer

covering from end of cable. If using

3-wire cable with grounding wire, cut

the bare wire even with outer covering.

STEP 1b. Cut 1 inch of insulation from

the end of each insulated wire. Shape

the end of each wire into a “U" shaped

hook.

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 65 66

Comments to this Manuals

No comments