Kenmore 78033 Use and Care Guide download pdf (Page 15)

REFRIGERATOR INSTALLATION

Loosen the handle mounting fastener with a ¼” hex

wrench.

Fastener

Unscrewtheplugbuttonwithyourngersbyrotatingit

counterclockwise;itwillloosenandfallfree.

Plug

button

Install the plug button on the left side and install the

handle mounting fastener on the right side.

Plug

button

Mounting

fastener

Using a ¼” socket wrench, loosen and remove Hinge

Pin from the Middle Hinge Bracket. Remove washer

underneath the middle hinge and set aside.

NOTE: At this point the door will be loose. Slightly lift the

door and remove it.

Loosen and remove the two bolts and use the Phillips head

screwdriver to remove the Middle Hinge Bracket from the

refrigerator housing. Set parts aside.

Remove the washer from the Bottom Hinge Pin.

Using a ¼” socket wrench, loosen and remove the Hinge

Pin from the Bottom Hinge. Reattach the Hinge Pin to the

opposite side of the hinge.

NOTE: This is easier to do while the hinge is still attached.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

No comments

Kenmore 78033 Use and Care Guide Page 15