Kenmore 78033 Use and Care Guide download pdf (Page 33)

Problem Possible Causes Solutions

The refrigerator

seems to make too

much noise.

The sounds may be normal for your

refrigerator.

Refer to the Understanding Sounds You May

Hear section for more information.

The icemaker is not

producing ice or not

enough ice.

New installation. Wait 12 to 24 hours after icemaker

installation for ice production to begin. Wait

72 hours for full ice production.

The refrigerator is not connected to a water

supplyorthesupplyshutovalveisnot

turned on.

Connect refrigerator to the water supply and

turnwatershutovalvefullyopen.

Reverseosmosiswaterltrationsystemis

connected to your cold water supply.

Reverseosmosisltrationsystemscanreduce

the water pressure below the minimum

amountandresultinicemakerissues.(Referto

Water Pressure section.)

Kink in the water source line. Akinkinthelinecanreducewaterow.

Straighten the water source line.

Ice demand has exceeded storage capacity. The icemaker will produce approximately 100

cubes in a 24 hour period.

NOTE: An extra ice bucket is provided in

the freezer section for additional storage

capacity.

The icemaker is not turned on. Locate the icemaker ON/OFF switch and

conrmitisintheON (I) position.

There is something on the ice-detecting sensor. Foreign substances or frost on the ice-

detecting sensor can interrupt ice production.

Make sure the sensor area is clean at all times

for proper operation.

The temperature setting for the freezer is too

warm.

The recommended temperature for the freezer

compartment for normal ice production is

0°F. If the freezer temperature is warmer, ice

productionwillbeaected.

The doors are opened often. If the doors of the unit are opened often,

ambient air will warm the refrigerator which

will prevent the unit from maintaining the

set temperature. Lowering the refrigerator

temperature can help, as well as not opening

the doors as frequently.

The doors are not closing properly. If the doors are not properly closed, ice

productionwillbeaected.See“Doorswill

not close completely” in the Troubleshooting

section for more information.

Refrigerator or

Freezer section is too

cold.

Controls are not set correctly for conditions. If the temperature is too cold, raise the

temperature setting one increment at a time

(refertotheSetting the Controlssection).

When changing control settings, wait 24 hours

before making additional adjustments.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

Comments to this Manuals

No comments

Kenmore 78033 Use and Care Guide Page 33

Comments to this Manuals

Related products and manuals for Fridges Kenmore 78033