Kenmore 200 User Manual download pdf (Page 46)

Corded Buttonhole

(T) Stitch pattern:

(2) Needie thread tension

(1) Presser foot R:

® Pressure dial

1 to 5

Autonnatic buttonhole foot

-1

Use the same procedure as the square buttonhole

procedure.

* Set the stitch width to match the thickness of the cord

used.

To sew

1] With the buttonhole foot raised, hook the filler cord on

the spur at the back of the buttonhole foot.

Bring the ends toward you under the buttonhole foot,

clearing the front end.

Hook the filler cord into the forks @ on the front of the

automatic buttonhole foot to hold them tight.

Lower the needle into the garment where the buttonhole

will start, and lower the foot.

CD Spur

(2) Forks

I Press the start/stop button and sew the buttonhole.

Each side of the buttonhole and the bartacks will be

sewn over the cord.

Remove the fabric from the machine, and cut the sewing

threads only.

(3) Needle thread (Top thread)

(D Bobbin thread (Bottom thread)

I Pull the loose ends of the filler cord to tighten it.

Tie the ends in a knot, or thread them through a hand

sewing needie. Draw them to the wrong side of the fabric

and knot.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 89 90

No comments

Kenmore 200 User Manual Page 46