Kenmore 200 User Manual download pdf (Page 47)

Darning

(T) Stitch pattern:

(2) Needie thread tension

(1) Presser foot R:

® Pressure dial

3to6

Autonnatic buttonhole foot

To sew

(T) Button holder

Seiect the pattern 23.

Puli the button holder (T) fully to the rear.

Place the garment under the foot. Press the up/down

needle button twice. Remove the fabric to the left to draw

both threads under the foot and put the fabric back under

the foot.

Lower the foot. Press the start/stop button, the machine

will lock stitch, sew rows of darning, lock stitch and stop

automatically.

Repeat sewing by turning the fabric to reinforce it.

Note:

The maximum size of darning is 3/4"{2 cm) long and 1/4"

(0.7 cm) wide.

(D Maximum length 3/4" (2 cm)

(3) Maximum width 1/4" (0.7 cm)

To sew a shorter darning

d) Reverse button

(5) Required length

To sew a darning less than 3/4" (2 cm) long, first

stop the machine after sewing the required length (D, then

press the reverse button (¡). The required length (|) has

now been determined.

Now restart the machine and continue sewing until the

machine stops automatically.

To sew the same size darning

Simply restart the machine to sew another darning of the

same size.

To sew the next darn at a different size, press the cancel

key.

To adjust the evenness of darning

You can correct the unevenness of darning by pressing

the:+ or key.

If the left corner is lower than the right side, press the

' key to correct it, and vice versa.

Note:

The default setting is 3.0.

Restart for the Same Size

Different Size iCancell

3.0-

i Cancel!

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

Comments to this Manuals

No comments

Kenmore 200 User Manual Page 47

Comments to this Manuals

Related products and manuals for Sewing machines Kenmore 200