Kenmore 200 User Manual download pdf (Page 34)

stretch Stitch

(D Stitch pattern: 10

(D Needle thread tension 3 to 6

(D Presser foot A: Zigzag foot

(4) Pressure dial 3

This is a narrow stretch stitch designed to eliminate

puckering on knit fabrics and bias seams, while permitting

the seam to be pressed completely open flat.

Basting Stitch

(T) Stitch pattern: 15

(D Needle thread tension 1 to 4

(D Presser foot A: Zigzag foot

0 Pressure dial 1

The basting stitch is used to hold fabric layers together

during fitting. Use a fine needle so as not leave permanent

needle marks on fabrics.

Press pattern 15 on the visual touch screen. Drop the feed

dogs (see page 6).

Depress the foot control. The machine will take one stitch

and stop automaticaiiy.

Hold the fabric taut and slide it to where you want the next

stitch, then depress the foot control again.

Continue in this manner sliding the fabric sideways or

forward.

Zipper Sewing

0 Stitch pattern: 1

0 Needle thread tension 2 to 6

0 Presser foot E: Zipper foot

Pressure dial 3

To snap on the zipper foot

Groove

To sew left side

To sew right side

Fit the pin on the zipper foot into the groove on the foot

holder.

* To sew the left side of the zipper, attach zipper foot with

the right-hand side of pin.

* To sew the right side of zipper, attach the zipper foot with

the left-hand side of pin.

1 5

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

No comments

Kenmore 200 User Manual Page 34