Kenmore 200 User Manual download pdf (Page 28)

straight Stitch

(T) Stitch pattern:

(2) Needie thread tension

(

) Presser foot A:

® Presser foot H:

(D Pressure dial

1 or 2

2 to 6

0 0

I 1

Zigzag foot

Straight stitch foot

Note:

When using the straight stitch foot, make sure to adjust

the needie position to 3.5. Otherwise the needle may hit

the sewing foot and possibly break.

Straight Stitch

To sew

Raise the presser foot and position the fabric next to a

seam guideline on the needle plate. Lower the needle to

the point where you want to start.

Pull the threads towards the back and lower the presser

foot. Press the start/stop button or foot control, and gently

guide the fabric aiong the seam guideline letting the fabric

feed naturally.

Securing seam

0 Reverse button

Jj For fastening the ends of seams, press the reverse

button 0 and sew several reverse stitches.

The machine sews reverse stitches as long as you press

and hold the reverse button

When sewing with the lock*a-matic stitch and locking

stitch, press the reverse button once, the machine will

sew several reverse or locking stitches and stop

automatically.

2] Raise the presser foot. Remove the fabric, draw it to the

back.

3] Cut the thread by using the thread cutter.

Now the threads are cut the proper length for starting the

next seam.

Changing sewing direction

Up/down needie button

Stop the machine and bring the needie down into the

fabric by pressing the up/down needle button

. Raise

the presser foot. Pivot the fabric around the needie to

change the sewing direction as directed. Lower the

presser foot and sew in a new direction.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

Comments to this Manuals

No comments

Kenmore 200 User Manual Page 28

Comments to this Manuals

Related products and manuals for Sewing machines Kenmore 200