Kenmore Elite 36'' Italian-Design Wall-Mounted Range Hood Warranty download pdf (Page 8)

INSTALL THE ELECTRICAL PLATE

CONNECT THE WIRING

Note: This range hood must be properly grounded.

The unit should be installed by a qualied electri-

cian in accordance with all applicable national and

local electrical codes.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an

electrical short circuit, grounding reduces the risk

of electric shock by providing an escape wire for

the electric current. This appliance is equipped with

a cord having a grounding wire with a grounding

plug. The plug must be plugged into an outlet that is

properly installed and grounded.

WARNING - Improper grounding can result in a risk

of electric shock.

Consult a qualied electrician if the grounding

instructions are not completely understood, or if

doubt exists as to whether the appliance is properly

grounded.

Do not use an extension cord. If the power supply

cord is too short, have a qualied electrician install

an outlet near the appliance.

Set the electrical power supply within the space

covered by the decorative ues.

Position the power socket at a maximum distance

of 33-7/16” (85 cm) from where the lead exits from

the hood (see illustration alongside). Make sure this

does not interfere with the bracket fastening area or

with the decorative ue (where the ue touches the

wall).

Fit the plug into the power socket.

ELEC-

TRICAL

PLATE

Mount the electrical plate to the hood with 2 screws (3,9 x 9,5 mm).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Kenmore Elite 36'' Italian-Design Wall-Mounted Range Hood Warranty Page 8