4
CLEANING
WARNING: To reduce the risk of electric shock,
disconnect from power supply before
cleaning.
Grease lters
Clean frequently using hot water and a mild de-
tergent or in your dishwasher. The aluminum mesh
lters should be washed approximately every month
depending on the amount of usage. Wash more
often if your cooking style generates greater grease
- like frying foods or wok cooking.
Non-ducted charcoal lters
(available separately - see page 5)
Clean lter surfaces frequently with a damp cloth
and a mild detergent. DO NOT immerse lters in
water or put in dishwasher.
Stainless steel hood surfaces
Stainless steel hoods should be washed regularly
with a clean cloth, warm water and mild soap or
dish detergent. Clean in the direction of the polish
lines. Rinse well with clear water and wipe dry im-
mediately. You may wish to apply light oil used for
furniture polishing to emphasize it’s bright nish.
OPERATION
Controls:
The hood is operated using the slide controls under
the hood canopy.
The light switch turns the lamps on and o.
The blower switch makes it possible to select the
motor operating speed. Position 0: motor o.
The pilot lamp lights up whenever the blower is on.
CHARCOAL
FILTER
RING
NUT
LIGHT
SWITCH
PILOT
LAMP
BLOWER
SWITCH
HALOGEN BULBS
WARNING: To reduce the risk of electric
shock, disconnect hood from power supply
before changing bulbs.
This range hood requires two halogen bulbs (Type
T4, 12V, 20W).
To change bulbs:
1. Insert a at-blade screwdriver into one of the slots
on the bulb ring nut. Carefully turn nut counterclockwise to
remove.
2. Remove the bulb by pulling sideward (DO NOT
ROTATE). CAUTION: BULB MAY BE HOT!
3. Replace bulb and ring. Do not touch replacement
bulb with bare hands!
FUSE REPLACEMENT
WARNING: To reduce the risk of electric
shock, disconnect from power supply be-
fore replacing fuse.
Remove the decorative ue.
Open the fuse box.
Replace with the same type of fuse (5x20mm, 4A,
125V).
DECO-
RATIVE
FLUE
FUSE
BOX
FUSE
GREASE FILTER
Comments to this Manuals