Kenmore 17921 User Manual download pdf (Page 25)

NEEDLE PLATES

Fig. 1

You are provided with two needle plates:

A. Needle plate with wide oval hole for all

zigzag stitching.

B. Needle plate with round hole for regular

straight stitching and straight stretch

sewing.

CHANGING NEEDLE PLATE

1. Raise needle to its highest position and

raise presser foot. .

2. Remove accessory box and bobbin cover

plate.

3. Remove needle plate by placing thumb

under edge of plate and lifting up and out.

(See Fig. 2)

4. Place other needle plate making sure

bobbin case is in proper position as

shown in Fig. 3 by turning it counter

clockwise until it hits bobbin case

stopper. Push down the needle plate with

both hands to lock.

5. Replace bobbin cover plate.

IMPORTANT:

Don't turn hand wheel while needle plate is

removed, or needle may hit bobbin case and

cause needle damage.

Don't touch screws on the bobbin case

stopper.

FEED COVER PLATE

There are a few times when you want to

control the feeding of the fabric yourself.

Raise needle to its highest position and raise

presser foot. Place feed cover plate over

needle plate aligning two pins of feed cover

plate with holes of needle plate. You may

then determine the movement of the fabric

yourself.

22

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 64 65

Comments to this Manuals

No comments