Kenmore 73003 Owner's Manual download pdf (Page 14)

Installing the Status Indicator

The produce preserver comes with a status indicator, which should

be activated and installed at the same time the pouches are

installed.

1. Place the indicator face-down on a firm, flat surface.

2. Apply pressure to the bubble on the back of the indicator until

the bubble pops, to activate the indicator.

3. Slide open the cap on the top of the produce preserver housing.

4. Place the indicator in the top of the housing, facing outward.

5. Slide the cap closed, and check that the indicator is visible

through the rectangular hole in the cap.

NOTE: The cap will not easily close if the indicator’s bubble has

not been popped.

Replacing the Produce Preserver

The disposable pouches should be replaced every 6 months, when

the status indicator has completely changed from white to red.

To order replacements, contact us.

1. Remove the used pouches from the produce preserver housing.

2. Remove the used status indicator.

3. Install the replacement pouches and status indicator using the

instructions in the previous sections.

Accessories

Replacement Parts:

To order stainless steel cleaner or replacement filters, in the U.S.A.

call 1-844-553-6667, and in Canada call 1-800-469-4663. Ask for

the appropriate part number listed below or contact your

authorized Kenmore dealer.

Stainless Steel Cleaner and Polish:

Order Part #D22 M40083 R

REFRIGERATOR USE

Opening and Closing Doors

There are two refrigerator compartment doors. The doors can be

opened and closed either separately or together.

There is a vertically-hinged seal on the left refrigerator door.

■ When the left-hand refrigerator door is opened, the hinged

seal automatically folds inward so that it is out of the way.

■ When both doors are closed, the hinged seal automatically

forms a seal between the two doors.

Using the Controls

IMPORTANT:

■ Wait 24 hours for your refrigerator to cool completely before

adding food. If you add food before the refrigerator has

cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature

controls to a colder than recommended setting will not cool the

compartments any faster.

■ The recommended setting should be correct for normal

household refrigerator use. The controls are set correctly when

milk or juice is as cold as you like and when ice cream is firm.

■ If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not blocked

before adjusting the controls.

Control Panel

Your refrigerator has an internal control panel, located at the top of

the refrigerator compartment.

Temperature Control

For your convenience, the temperature control is preset at the

factory. When you first install your refrigerator, make sure the

control is still set to the recommended setting as shown.

A. Hinged seal

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comments to this Manuals

No comments

Kenmore 73003 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Fridges Kenmore 73003