Kenmore 26-41262 Owner's Manual download pdf (Page 19)

TIME AND STATUS DISPLAY

HOW TO USE

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the

washer will automatically detect the load size for

cycles that use load sensing. The control will then

optimize the wash and rinse times, based on the

selected cycle, modiﬁers and options. When the load

size has been determined, the display will change

from dashes (- - -) to the estimated time for that

cycle. For non-load sensing cycles, the estimated

time will display when the cycle is selected.

NOTE:

The time shown is only an estimate. For example,•

the time displayed may pause for a period of time

while the machine is heating the water or balancing

the load. Under certain conditions, the machine can

pause for extended periods of time.

Estimated time is based on normal operating•

conditions. Several external factors (load size, room

temperature, incoming water temperature, etc.) also

aﬀect the length of estimated time vs. actual time.

LOAD-SENSING INDICATOR

At the beginning of cycles that use the load sensing

feature, the LOAD SENSING light will blink while the

load size is being measured. Once the size has been

determined, the control adjusts the cycle for

optimum performance. Estimated time remaining will

not display until the load size has been determined,

and may be diﬀerent for each load.

CYCLE STATUS INDICATOR

These status LEDs illuminate to indicate which

stage of the cycle is currently running. A blinking

light indicates the active stage of the cycle. When

that stage is complete, the light will remain steady.

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer door

will lock while the washer is operating. The door can

be unlocked by pressing START/PAUSE to pause the

washer.

NOTE:

If the temperature in the washer is too high, the•

door cannot be unlocked until the washer

has cooled.

If the water level is too high, the door will not•

unlock. To drain the water, press POWER, then press

the SPIN SPEED button without selecting a cycle.

Press START/PAUSE and the water will drain and

the clothes will spin out. Do not try to force the

door open, as this will damage the door.

The time and status display shows the estimated time remaining, cycle progress, and door lock status.

D A

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Comments to this Manuals

No comments

Kenmore 26-41262 Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for Washing machines Kenmore 26-41262