Kenmore 88963 User Manual download pdf (Page 35)

TEMPERATURE PROBE MICRO/CONVEC COOKING

Consult the "Temperature controlled Cooking

Guide” on page 36 before you start Temperature

Probe Micro/Conuec Cooking. The following

directions show "One-Stage Cooking” only.

1. Put the Temperature Probe in

food, with the first inch of the

Sensor in center of food.

Probe should be in a level

direction or on an an^le as

shown.

2. Plug Temperature Probe into

socket on side of oven.

CAUTION: Do not plug the

Pointed End of the Temperature

Probe into the socket.

8. Touch START, G=

The oven is working when the

oven light is on. Lights below

COOK 1. above TEMP and

MICRO and CONVEC wiD go

on and the food temperature

is shown in the display window.

When the temperature of the

food reaches 185® F while the

oven temperature is

programmed for 390° F, a

tone wU sound and the word

“End” wiD show in the display

window for 2 seconds and the

cooking is over.

: tZSl

NOTES: The oven temperature of 350° F is

memorized in the oven. This means that if the desired

oven temperature is 350“ F, you need not touch OVEN

TEMP/PREHEAT or the numbers to set an oven

temperature. Skip steps 4 and 5,

3. Touch CLEAR.

4. Touch OVEN TEMP/

PREHEAT.

The light below COOK 1 will

go on and “F” shows in the

display wndow,

5. Set the oven temperature by

touching the correspjonding

numbers. "•

For example, set 390° F by

touching numbers "3”, “9”

and “0”.

“390F” then shows in the

display window. „

35 Df

rwii ■c»' It «gl

6. Touch MICRO/CONVEC C

TEMP.

Lights below COOK 1, above

TEMP and MICRO and

CONVEC wffl go on and “F”

shows in the display window,

7. Set the desired food

temperature for Temperature

Probe by touching the

corresponding numbers. If

185°F is desired, for example,

touch numbers “1", "8” and

“5” “185F* will shows in the

display window

_______

____

IB Sf

psirifwirwi

raadScii"'

[HZiEisa

r-^fyr3ffll

~5~irW1

Avoid opening the door often during cooking., Hot

air will escape from the oven and the oven

temperature will drop very quickly, adversely -

affecting the cooking results.

“Preheating” can be set according to the directions

on page 31. Follow the instructions numbered 1—4

on page 31, then follow the instructions beginning

with step 4 on this page. During pause after preheat

ing, place food in the oven and plug temperature

probe in as shown steps 1 and 2 above, then touch

START again.

{Be careful to plug temperature probe in. because the

oven inferior is hot)

"Multi-Stage Cooking” can be set according to the

directions on pages 37 and 38

Use Pol holders to remove the Metal Rack or Probe

after cooking as the Rack and/or Probe will be hoi

during cooldng.

Ceramic tray should always be in the oven for

miao/convec cooking

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 50 51

Comments to this Manuals

No comments

Kenmore 88963 User Manual Page 35

Comments to this Manuals

Related products and manuals for Kiln Kenmore 88963