Kenmore 88963 User Manual download pdf (Page 24)

rgL'*Vy*?f^y^'* rs»,v.' J»* vqJI,■ ytVT-rwr-yCT

S^Sgr7

SEaSiES

TEMPERATURE CONTROLLED

“HI-POWERTMULTLPOWER” COOKING

The "Temihfirature.Controlled Meat Cooking Guide * and "Reheating Guide” on Pages 22 and 23 will show

you which multi-power setting and temperature setting are recommended for the food you are cooking

When cooking with the temperature control settings, the timer is not used.

Place the temperature probe into the

food with the first inch of the

sensor in the center of the food.

The probe should be in a

level direction or on an

angle as shown. It should

NOT be put in from

the top.

2. Plug the temperature

probe into the socket on

the side of the oven.

CAUTION: Do not plug

the pointed end of the

temperature probe into

the socket.

3. Touch CLEAR.

4. Touch MICRO TEMP.

The lights above TEMP and

MICRO, below COOK 1 will

go on, and *T” will show in

the display window.

5. Choose the food temperature

and touch the corresponding

numbers. For example, if the

recipe calls for doneness at

165° F, you would touch

numbers‘T’%" and "5"

When you touch “165", the

display window will show

“165F” , If the temperature

probe is not plugged into the

socket, the word “Prob” will

flash and the oven wiD not

work.

rwi

IS Sf

, rss^snpa^wT^

£g~ir^nnsn

^ J i, , 5 _J

NOTE: The highest tempera

ture that can be set is 18S°F.

6. Touch MICRO POWER. ™

The word "HI” will show in

the display window untE you

enter a lower power setting.

This is to remind you that the

oven will always operate at full

power unless you set a lower

power.

« /

IPSnnigt

7. Choose the power control

setting you desire and touch

the corresponding numbers.

For example, if the recipe

should calí for cooking at the

“70 (ROA$T)” setting, you

would touch numbers "7” and

When you touch “7" and “0",

the display window will show

“70”. This ¡means that in the

"70 (ROAST)" setting, the

oven is at ^wer level 70.

NOTE: You do not need to

touch MICRO POWER when

you ate cooldng with HI (max

power). To set "Hi -POWER"

Cooking, skip steps 6 and 7

above. However, if MICRO

POWER is touched, the light

above MICRO will go on and the

word “HI” will show in the

display window. This is to tcB

you that the oven wiU work at HI

(highest microwave power)

unless a different power setting is

chosen.

8. Touch START. The oven will

begin to cook and you will be

able to see the temperature of

the food rising in the display

window.

9. A tone will sound and the

word “End” will show in the

display wipdow for 2 seconds

when the desired temperature

is reached.

NOTE: If you want to keep the food warm after

finishing the set cooking, you can use "Hold Warm"

feature. For detailed instructions on using "Hold

Warm" feature, see page 15.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 50 51

Comments to this Manuals

No comments

Kenmore 88963 User Manual Page 24

Comments to this Manuals

Related products and manuals for Kiln Kenmore 88963