Kenmore 141.173373 User Manual download pdf (Page 17)

B Installing Side Shelf, Side Burner and Tool

“ Holder Kit

Remove Side Burner from Side Burner Kit

before installing.

1. Enlisting the aid of an assistant, attach Side Burner

Frame to right side of grill. Attach Side Shelf to

left side of grill as shown in Figure 8a. Align

the 4 holes on Side Shelf and Side Burner Frame

with the threaded holes on left and right Bowl

Support Brackets. Tighten securely using 4 of the

1/4"x3/4" Pattern Head Screws provided.

2. install the Side Burner Gas Valve Assembly to

the Side Burner Frame. See Figure 8b. Attach

the Side Burner Gas Valve Assembly to the Side

Burner Gas Valve Hole on the Side Burner Frame,

as shown in Figure 8b. Align the 2 holes on

the Side Burner Frame with the threaded holes

on the Side Burner Gas Valve Bracket. Tighten

securely using 2 of M4x8mm Pattern Head

Screws and 2 Washers.

3. Cut Fastening Band from Side Burner Pot Support

and set Pot Support aside. Install the Side Burner

through the top hole in Side Burner Frame and

onto the Side Burner Gas Valve. Make sure that

opening at end of Side Burner Tube goes over

tip of Side Burner Gas Valve. Secure Side Burner

with supplied Cotter Pin. See Figure 8c or

Figure 8d. Place Pot Support into position on

Side Burner Frame.

4. install the Control Knob to the Side Burner Gas

Valve Stem. See Figure 8c or Figure 8d.

5. For LP Gas grills:

Connect the Electric Wire terminal from Side

Burner wth the other from Grill Head. Unscrew 1/

4" X 2" Pattern Head Screw from Right Cart Leg

and fix Wire Plug "A" into Wire Fastener. Install

Wire Fastener to Right Cart Leg. Tighten securely

using the same screw. See Figure 8c.

Figure 8a

SIDE SHELF

Figure 8c (LP gas model only)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 42 43

No comments

Kenmore 141.173373 User Manual Page 17