Kenmore 141.173373 User Manual download pdf (Page 14)

7. Instaii the Door Bracket to the inside of front

Cart Legs. Align the threaded holes on the Door

Bracket wth the holes on Cart Legs. Tighten

securely using 4 of the 1/4''x2” Pattern Head

Screws provided. (See Figure 3 on page 13)

Upper door bolt holes (at ends of bracket) must

face outward.

^ Installing The Cabinet Doors

For LP Gas grills:

1. Instaii the Door Stops to the Cart Bottom

Shelf and the Door Bracket. See Figure 4a.

2. Align the holes on the Door Stops with the

threaded holes on the top of the Cart Bottom

Shelf and bottom side of Door Bracket. Tighten

securely using 4 of the 1/4"x1/2" Pattern Head

Screws provided. See Figure 4a.

3. Remove the vdiite protective film from the

stainless steel Doors. Attach a Door Handle to

each Door using 2 of the M4x5mm Pattern

Head Screws provided. See Figure 4b. Be

careful not to scratch the Door surfaces.

4. When installing the Doors, make sure the

door bolt holes are located on the hinge sides

of the Cart Legs.

5. Instaii either Door by inserting 1/4"x5/8" partly-

threaded bolt through the lower door bolt hole

of the Door and into the tapped hole of the

Cart Bottom Shelf. Next, align the upper door

bolt hole of Door with the tapped hole in the

bottom of Door Bracket. Insert 1/4"x1/2" partly-

threaded bolt provided. Tighten both bolts

securely.

6. Repeat these steps to instaii the other Door.

7. Install the Cart Spice Basket to the inside of Left

Door. Align the threaded holes on the inside of Left

Door with the holes on the Cart Spice Basket.

Tighten securely uang 2 of the 1/4"x1/2" Pattern

Head Screws provided. See Figure 4b.

Figure 4a (LP gas model only)

Figure 4b (LP gas model only)

UPPER DOOR

DOOR

BRACKET

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Comments to this Manuals

No comments

Kenmore 141.173373 User Manual Page 14

Comments to this Manuals

Related products and manuals for Grills Kenmore 141.173373