Kenmore Elite 30'' Down Draft Hood 59960 Specifications download pdf (Page 3)

Alwaysturnthedowndraftbloweronbeforeyoubegincook-

ingtoestabIishanairflowinthekitchen.LetthebIowerrunfor

afewminutestocleantheairafteryouturnthecooktopoff.

Thiswillkeepthewholekitchencleanerandbrighter.

CONTROLS

TurnthedowndraftblowerONbypressingdownontheacti-

vatingswitch.Theairventwillrise.

The blower can be turned ON or OFF and its speed can be

adjusted with the recessed knob on the right side of the air

vent.

WARNING: Always disconnect electric power

supply before cleaning unit.

Use a mild detergent suitable for painted surfaces. DO NOT

USE ABRASWE CLOTH, STEEL WOOL PADS, OR SCOUR-

ING POWDERS. Vacuum blower to clean. Do not immerse

blower in water.

Wash the 2 aluminum grease filters in a mild detergent solu-

tion or a dishwasher. Remove them from the air vent by grasp-

ing the tab at the top of each filter.

The filters are different sizes. Be sure to repBace them as

removed (wider one on the meft),with tabs UP.

_ ARNING: Atways disconnect electric power

supply before servicing unit.

It may be necessary to remove the downdraft blower system

from the cabinet in order to service components such as the

blower motor or air vent mechanism.

Disconnect power to the cooktop and remove it first. Reverse

the steps under "MOUNT THE UNIT" to remove the downdraft

from the cabinet.

Turn the downdraft blower OFF by pressing the activating

switch again. The air vent will go down and the blower will

shut OFF.

For most convenient operation, set the bmower to your

favorite speed. The bmower will come on to this speed

whenever the activating switch is pressed and the air

vent rises.

HEAT SENTRY

When chimney is UP and blower is ON (at any speed) or OFF:

If the exhaust temperature becomes higher than expected,

the Heat Sentry mode will activate and increase the blower

speed to HIGH.

Lowering the chimney will turn blower OFF _ even if Heat

Sentry is active.

1 2 3 4 5 6 7 8 ... 23 24

No comments

Kenmore Elite 30'' Down Draft Hood 59960 Specifications Page 3