Kenmore Elite 6.9 cu. ft. Double-Oven Electric Range w/ True Convection - Black Owner's Manual download pdf (Page 14)

Before Setting the Oven Controls

Removing, replacing, and arranging at or oset

oven racks

• To arrange - Always arrange the oven racks when the oven

is cool (prior to operating the oven).

• To remove - Pull the oven rack straight forward until it



and slide out.

• To replace - Place the oven rack on the rack guides on

both sides of oven walls. Tilt the front of oven rack upward

slightly and slide the oven rack back into place. Be sure

oven racks are level before using.

Protective liners - Do not use aluminum

foil to line the oven bottom. Only use aluminum foil as



liners may result in risk of electric shock or fire.

Be sure to remove all oven racks and

accessories before starting a self clean cycle.

Always use pot holders or oven mitts when

using the oven. When cooking, the oven interior and exterior,

as well as the oven racks, will become very hot which can

cause burns.

Glide Racks

The glide rack is an extendable rack that makes food



be pulled away from the oven without rubbing the sides of

the oven wall.

Removing and replacing the glide racks

To remove the glide rack:



of the rack, as shown in figure 1.

2. While holding up the release lever (see figure 2), pull

the glide rack out of the oven until the stop position is

reached, use two hands if necessary.

3. Using both hands, grasp the upper and lower portions of

the glide rack (see figure 3).



the rack away from the oven.

5. Be sure to grasp both upper and lower rack portions

together when removing or handling the glide rack. The

rack portions move independently and are difficult to

handle unless held together.

Figure 1 - Extendable glide rack with release lever in

locked position

Figure 2 - Extendable glide rack with release lever in

unlocked position

Figure 3 - Removing and replacing the oven glide rack.

To replace the glide rack:

1. Grasp both upper and lower portions of the glide rack

(see figure 3).



3. Tilt the front of the rack upward slightly and slide the rack

completely into position. Some force may be necessary to

make sure the oven rack has snapped into place.

Release lever

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments

Kenmore Elite 6.9 cu. ft. Double-Oven Electric Range w/ True Convection - Black Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Drink coolers Kenmore Elite 6.9 cu. ft. Double-Oven Electric Range w/ True Convection - Black