Kenmore 81414 Owner's Manual Page 22
- Page / 46
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
- 22 -
WARNING
Always turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner
.
Failure to do so could result in electrical shock or personal injury.
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
TROUBLESHOOTING
Vacuum cleaner won’t 1. Unplugged at wall outlet. 1. Plug in firmly, press ON/OFF switch.
start.
2. Tripped circuit breaker/blown 2. Reset circuit breaker or replace
fuse at household service panel. fuse.
3. Loose hose electrical 3. Reconnect hose ends.
connections.
Poor job of dirt 1. Full or clogged dust bag. 1. Change bag.
pick-up. 2. Clogged airflow passages. 2. Clear airflow passages.
3. Dirty filters. 3. Clean/change filters.
4. Wrong pile height setting. 4. Adjust setting.
5. Wrong power level selected. 5. Adjust control.
6. Hole in hose. 6. Replace hose.
7. Worn PowerMate
®
agitator. 7. Change agitator.
8. Worn or broken belt.
8&9. See BELT CHANGING AND
9. Dirty agitator or end caps.
AGITATOR CLEANING (page 19).
10. Canister hood open. 10. Close and latch hood.
11. Tripped overload protector in 11. Remove any items that may be
PowerMate
®
. See OVERLOAD caught or jammed, then reset. If
PROTECTOR (page 14). vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset.
Vacuum cleaner starts 1. Hose or hood electrical 1. Check connections, reconnect hose
but shuts off. .sdne.snoitcennoc
2. Tripped overload protector in 2. Remove any items that may be
PowerMate
®
. See OVERLOAD caught or jammed, then reset. If
PROTECTOR (page 14). vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset.
3. Tripped thermal protector 3.
2&3.
See THERMAL PROTECTOR (page
.)41.retsinac ni
PowerMate
®
will not run
when attached.
1. Plug in firmly.
See BELT CHANGING AND
AGITATOR CLEANING (page 19).
4. Remove any items that may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset.
5. Slide handle switch to CARPET
position to activate
PowerMate
®
.
1. PowerMate
®
connections
unplugged.
2. Worn or broken belt.
3. Dirty agitator or end caps.
4. Tripped overload protector in
PowerMate
®
. See OVERLOAD
PROTECTOR (page 14)
5. Handle switch set to FLOOR
position.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
- Kenmore® 1
- TABLE OF CONTENTS 2
- PACKING LIST 2
- IMPORTANT SAFETY INSTRUC 4
- WARNING: 4
- SAVE THESE INSTRUCTIONS 4
- PARTS AND FEATURES 5
- REPLACEMENT PARTS 5
- ATTACHMENTS 6
- HANDLE ASSEMBLY 8
- Adjustment Indicator 10
- Adjustment 10
- FOR BEST CLEANING RESULTS 11
- SUGGESTED PILE HEIGHT 11
- SETTINGS 11
- SUGGESTED SWEEPING PATTERN 11
- POWERMATE 12
- EDGE CLEANER 12
- ATTACHMENT STORAGE 12
- ATTACHMENTS ON HANDLE 12
- CLEANING AREA 13
- ATTACHMENTS ON WAND 13
- OVERLOAD PROTECTOR 14
- ELECTRONIC SUCTION CONTROL 14
- CHECK BAG INDICATOR 14
- THERMAL PROTECTOR 14
- CANISTER CARE 15
- DUST BAG CHANGING 16
- MOTOR SAFETY FILTER CLEANING 17
- EXHAUST FILTER CHANGING 18
- Belt Path 20
- Brush Unit 20
- AGITATOR SERVICING 21
- TROUBLESHOOTING 22
- TABLA DE CONTENIDOS 24
- LISTA DE EMPAQUE 24
- ADVERTENCIA: 26
- GUARDE ESTAS INSTRUCCIONES 26
- PIEZAS Y CARACTERÍSTICAS 27
- PIEZAS DE REPUESTO 27
- ACCESORIOS 28
- PIEZAS DE LA MANGUERA 29
- ENSAMBLAJE DE LA MANILLA 30
- Lengüeta De 31
- Seguro De La 31
- Manguera 31
- ADVERTENCIA 32
- Liberación 32
- LOW POWER 33
- PRECAUCIÓN 33
- CONSEJOS DE ASPIRADO 33
- Gancho De 34
- Almacenamiento 34
- ÁREA DE LIMPIEZA 35
- ACCESORIOS EN LA VARA 35
- PROTECTOR CONTRA SOBRECARGAS 36
- PROTECTOR TÉRMICO 36
- CUIDADO DEL CONTENEDOR 37
- CAMBIO DE LA BOLSA PARA POLVO 38
- CAMBIO DEL FILTRO DE ESCAPE 40
- CUIDADO DEL EQUIPO POWERMATE 41
- Tapa del extremo 42
- Ruta de la correa 42
- Unidad de cepillo 42
- REPARACIÓN DEL AGITADOR 43
- RESOLUCIÓN DE PROBLEMAS 44
Related products and manuals for Vacuum cleaners Kenmore 81414
Vacuum cleaners Kenmore 81214 Owner's Manual
(46 pages)
(46 pages)
Vacuum cleaners Kenmore 10701 Owner's Manual
(36 pages)
(36 pages)
Vacuum cleaners Kenmore 31140 Owner's Manual
(48 pages)
(48 pages)
Vacuum cleaners Kenmore 22614 Owner's Manual
(52 pages)
(52 pages)
Vacuum cleaners Kenmore 10340 Owner's Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 0.729 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals