Kenmore 110.4292 User Manual download pdf (Page 16)

stain Treat

Use this option for heavily soiied loads that need improved stain

treatment. When Stain Treat is seiected, the water temperature of

the selected wash cycle is automatically set to warm. The water

will then be heated to a hot water temperature to aid in stain

removal. This option will provide optimal removal of organic

stains such as blood.

NOTE: If Stain Treat is selected with the Sanitary cycle, the water

will be heated to a very hot temperature.

Auto Soak

Use the Auto Soak option for loads of heavily soiled cotton, linen,

polyester or nylon with set-in stains. During Auto Soak, water will

be added to the drum and the laundry will be equally distributed

by a short tumbling phase. Laundry will then be soaked by

phases without drum movement. After soaking, the washer

drains without spinning.

Added to a Wash Cycle: A 30 minute soak time is added to the

main wash cycle to improve removal of set-in stains.

1. Add detergent to both the Prewash and Main Wash

compartments of the Dispenser Drawer.

NOTE: The Auto Soak and Prewash options cannot be

selected in the same cycle. Use powdered detergent for the

main wash cycle because liquid detergent will seep into the

washer during Auto Soak.

2. Select a Wash Cycle.

3. Select AUTO SOAK.

NOTE: For cycles with hot wash temperatures, the soak

temperature will be set to warm; otherwise, the soak

temperature will be the same as the wash temperature.

4. Select and hold START {approximately 1 second). After

soaking, the washer drains and the wash cycle starts.

Without a Wash Cycle: Provides a soak time with warm or cold

water followed by drain.

1. Add detergent only to the Prewash compartment of the

Dispenser Drawer.

2. Select DRAIN/SPIN or RINSE/SPIN first, then AUTO SOAK.

3. Choose the desired soak temperature.

4. Select and hold START (approximately 1 second).

2nd Rinse

A second rinse can be used to ensure the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse.

Extended Spin

Use this option to add an additional spin to any cycle to improve

drying times for some heavy fabrics or special-care items by

reducing excess water, which may save energy.

Preset cycle settings of Water Temperature, Wash/Rinse, and

Spin Speed can be changed. You can change a modifier after

starting a cycle anytime before the selected Modifier begins. Not

all Modifiers are available with all options and cycles.

MODIFIERS

Auto Temp Controi

• EXTRA HOT / Cold

• Extra High

• HOT / COLD

• HIGH

• WARM / WARM

• MEDIUM

• Warm / cold

• Low

• HIGH

• Cold / Cold

• Extra Low

•

Low

• Tap Cold / Cold • NO Spin

•

OFF

WATER TEMP

WASH / RIN5R

SPIN SPEED

END of CYCLE SIGNAL

To change the water temperature, select the WATER TEMP

button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button

until the desired setting glows.

• HEAVY

• NORMAL

® LIGHT

SOIL Level

■ To change cycle time, select SOIL LEVEL button.

■ To change the loudness of the End of Cycle Signal, select

END of CYCLE SIGNAL.

Wash/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Eollow

garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses

increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

Temperature Guide

Wash Water Temperature

Suggested Fabrics

Extra Hot Sturdy colorfast fabrics

153°F(67°C) Heavy soils

HOT* Whites and pastels

140°F(60°C)

Heavy soils

WARM Bright colors

tOA^FCAO'C)

Moderate to light soils

COLD Colors that bleed or fade

77“F (25°C) Light soils

In wash water temperatures colder than 70°F (21 °C),

detergents do not dissolve well. Soils may be difficult

to remove.

*When used with Stain Treat option, the water is heated

gradually to assist in the removal of organic soils such

as blood.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Comments to this Manuals

No comments

Kenmore 110.4292 User Manual Page 16

Comments to this Manuals