Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black Installation Guide download pdf (Page 5)

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS

To avoid breakage: Do NOT handle or manipulate

the unit by the cooktop glass.

The counter-top around the cut-out should be ﬂ at and leveled

(see cross-hatched area in illustration 1).

Before installing the unit, measure the heights of the two (2)

cabinet sides (H1-4), front and back (see illustration 1) from

the ﬂ oor to the top of the counter.

Remove the protective channels on each side of the

glass cooktop (if provided).

Illustration 1

Shave

Raised

Edge

to Clear

Space for a

" (79.5 cm)

Wide Cooktop.

1 ½" Max.

(3.8 cm Max.)

Slide the unit into the cabinet. Make sure the center of

the unit is aligned with the center of the cabinet cut-out.

Illustration 2

To successfully

install the range,

the initial level

height from ﬂ oor

to underside of

cooktop glass

frame should

be at least

1/16" taller than

cabinet sides as

measured in step

After the installation, MAKE SURE that the

unit is supported by the leveling legs NOT

by the cooktop.

Metal Flange

Level the range using the

four (4) leveling legs so

that the height from the

ﬂ oor to the underside of

the cooktop glass frame

is greater than the tallest

cabinet measurement

by at least 1/16" (see

illustration 2).

The metal ﬂ ange under each side of the cooktop MUST be

placed over the cabinet countertop for proper unit support.

The glass cooktop should NOT directly touch the countertop

(see illustration 2) or could cause glass breakage voiding the

warranty. Level the unit if needed.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black Installation Guide Page 5

Comments to this Manuals

Related products and manuals for Ovens Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black