Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black Installation Guide download pdf (Page 7)

30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS

Electrical Connection to the Range

This appliance is manufactured with the neutral

terminal connected to the frame.

Three Conductor Wire Connection to Range

If local codes permit connection of the frame

grounding conductor to the neutral wire of the

copper power supply cord (see Fig. 3):

1. Remove the 3 screws at the lower end of the

rear wire cover, then bend the lower end of the

rear wire cover (access cover) upward to expose

range terminal connection block (see Fig. 2).

2. Using the nuts supplied in the literature package,

connect the neutral of copper power supply

cord to the center silver-colored terminal of the

terminal block, and connect the other wires to

the outer terminals. Match wires and terminals by

color (red wires connected to the right terminal,

black wires connected to the left terminal) (see

Fig. 3).

3. Lower the terminal cover and replace the 3

screws.

Cord

Mounting

Plate

Cord

Mounting

Plate

supplied by the

must be installed at

this location

strainrelief

user

Terminal

Block

To 240 V

receptacle

White Wire

(Neutral)

Grounding

Strap

Black

wire

Red wire

Silver colored Terminal

1-1/8“ Dia.

Direct

Connection

Hole. Punch

out knockout

for 1-3/8“ Dia.

Cord Kit Hole

Figure 3

Four Conductor Wire Connection to Range

Where local codes does NOT permit connection of

the frame grounding conductor to the neutral wire

of the copper power supply cord (see Fig. 4)

1. Remove the 3 screws at the lower end of the

rear wire cover, then raise the lower end of the

rear wire cover (access cover) upward to expose

range terminal connection block (see Fig. 2).

2. Remove the ground strap from the terminal block

and from the appliance frame.

3. Using the nuts supplied in the literature package,

connect the ground wire (green) of copper power

supply cord to the frame of the appliance with

the ground screw, using the hole in the frame

where the ground strap was removed (see Fig. 4).

4. Connect the neutral of the copper power supply

cord to the center silver-colored terminal of the

terminal block, and connect the other wires to

the outer terminals. Match wires and terminals by

color (red wires connected to the right terminal,

black wires connected to the left terminal).

5. Lower the terminal cover and replace the 3

screws.

Figure 4

1-1/8“ Dia.

Direct

Connection

Hole. Punch

out knockout

for 1-3/8“ Dia.

Cord Kit Hole

NOTE: Be sure to remove the supplied

grounding strap

To 240 V receptacle

Terminal Block

Silver Colored

Terminal

Red

Wire

White Wire

(Neutral)

Ground

(Bare

or Green

Wire)

Copper

Black wire

supplied by the

must be installed at

this location

strainrelief

user

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black Installation Guide Page 7

Comments to this Manuals

Related products and manuals for Ovens Kenmore Elite 30'' Double-Oven Slide-In Electric Range w/ Convection - Black