Kenmore 71212 Owner's Manual download pdf (Page 14)

INSTALLATION INSTRUCTIONS

Reverse Doors (optional) (continued)

12.

Remove the refrigerator door stop from the underside

of refrigerator door and secure it on the opposite side

with a Phillips screwdriver.

13.

With a screwdriver, pry out the plugs from the top of

refrigerator door and replace them on the opposite

side.

14.

Remove the gaskets from freezer and refrigerator door.

And then rotate them 180 degrees. Reassemble them

by pushing from bottom to top.

NOTE:

The oil on the gasket is normal. There is no need

to clean the oil. It helps to prevent deformation of the

hinge side of gasket. If more oil is needed, use Vaseline.

15.

Carefully place refrigerator door onto the hinge plate

in lower corner. Ensure that the washer is in place on

top of the hinge shaft.

16.

Attach the middle hinge with the screws removed

from the opposite side and secure them using a 5/16”

wrench.

1 7.

Use foam door spacer to set the correct gap between

the freezer and refrigerator door. Place spacer

between the doors when tightening the freezer door

top hinge.

NOTE:

You may need to use the spacer again to set

gap. Ensure the washer is in place on top of the hinge

shaft.

18.

Slide top hinge into place on freezer door and secure

screws with 5/16 “ wrench. Conrm that all screws

have been tightened securely.

19.

Snap hinge cap securely in place.

20.

Replace front base grille. Remember to plug in your

refrigerator and reset the controls to the appropriate

setting(s).

Door Gasket

Door Gasket Oil

Handle Hole

Plugs

Refrigerator

Door Stop

Refrigerator

Door Hinge

Hole Plug

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Comments to this Manuals

No comments

Kenmore 71212 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Fridges Kenmore 71212