search

Kenmore 51737 Owner's Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 13
14
REFRIGERATOR INSTALLATION
Left leveling
leg
Height
Height
dierence
dierence
PRESS & HOLD
CHANGE FILTER
C
F
C
F
Right leveling leg
Height
dierence
Height
dierence
PRESS & HOLD
CHANGE FILTER
C
F
C
F
Height
dierence
Height
dierence
PRESS & HOLD
CHANGE FILTER
C
F
C
F
Up
Down
1
keeper nut
2
Adjustment
hinge pin
3
Tool for
adjustment
LEVELING
After installing, plug the refrigerator’s power cord into a
3-prong grounded outlet and push the refrigerator into the
final position.
Your refrigerator has two front leveling legs—one on the
right and one on the left. Adjust the legs to alter the tilt
from front-to-back or side-to-side. If your refrigerator
seems unsteady, or you want the doors to close more
easily, adjust the refrigerator’s tilt using the instructions
below:
NOTE: Tools Required: / ” (18mm) wrench or fl at blade
screwdriver.
1. Turn the leveling leg counterclockwise to raise that side
of the refrigerator or clockwise to lower it. It may take
several turns of the leveling leg to adjust the tilt of the
refrigerator.
NOTE: Having someone push backward against the top of
of the leveling legs.
This makes it easier to adjust the legs.
2. Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt
the refrigerator slightly more to the rear by turning
both leveling legs counterclockwise. It may take
several more turns, and you should turn both leveling
legs the same amount.
DOOR ALIGNMENT
If the doors are still uneven after the refrigerator has
been leveled, fi nish adjusting the doors by following the
instructions below.
Adjusting tools: 5/16” (8mm) wrench and 3/4” (19mm)
wrench
Using a 3/4” (19mm) wrench, turn the keeper nut
clockwise to loosen the keeper nut.
Using a 5/16” (8mm) wrench, turn the adjustment hinge
pin clockwise or counterclockwise to level the refrigerator
and freezer door.
After leveling the door, turn the keeper nut
counterclockwise to tighten it.
CAUTION: Do not overtighten the door adjustment
screw. The hinge pin can be pulled out. (The adjustable
range of height is a maximum of 2” [5 cm]).
11
16
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Comments to this Manuals

No comments
Related products and manuals for Fridges Kenmore 51737
Fridges Kenmore 76392 Owner's Manual     (64 pages)
Fridges Kenmore 79433 Owner's Manual   (38 pages)
Fridges Kenmore 70013 Owner's Manual    (40 pages)
Fridges Kenmore 51764 Owner's Manual     (88 pages)
Fridges Kenmore 51753 Owner's Manual     (80 pages)
Fridges Kenmore 70812 Owner's Manual     (88 pages)
Fridges Kenmore 22052 Owner's Manual     (48 pages)
Fridges Kenmore 79439 Owner's Manual   (38 pages)
Fridges Kenmore 99098 Owner's Manual    (9 pages)
Fridges Kenmore 46-51112 Owner's Manual     (80 pages)
Fridges Kenmore 46-60219 Owner's Manual     (64 pages)
Fridges Kenmore 46-70812 Owner's Manual     (88 pages)
Fridges Kenmore 46-70332 Owner's Manual   (46 pages)
Fridges Kenmore 46-60502 Owner's Manual   (29 pages)
Fridges Kenmore 46-73063 Owner's Manual     (140 pages)
Fridges Kenmore 46-69319 Owner's Manual     (56 pages)
  • Norgren Teldat Amplicom Kwik Tek Wouxun
  • Quantum Decoders AmpliVox Headphone/headset accessories Sharper Image Alarm clocks Nexstar Telescopes Sebo Vacuum cleaners
  • Professional Woodworker 7802 GE AJCM08ACG Sony CMT-SE9 DTS XD10 Samsung UA40C7000WF
  • Blanco 511-654 User Manual Whirlpool MWN 400 S Instruction for Use Olivetti 3501 User Manual Watchguard SOHO User Manual Mutec MC-4 User Manual