Kenmore 790.7942 User Manual download pdf (Page 28)

Setting Oven Controls

* Setting Convection Convert Feature

* Setting Add 1 Minute Feature

To set the Convection Convert feature

The CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When

set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.

Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.

¡NSTRUCTIONS

Using Convection Convert feature to adjust oven

temperature from a Bake recipe (example below

when setting oven for 350°F):

1. Arrange interior oven racks and place food in oven.

2. Press , (See Fig. 2). If a Cook Time or a Delay Start

is desired, enter the times now.

3. Press . "CONV BAKE" and the oven set temperature

adjustment will appear in the display (for this example it is

325°F). A beep will sound once the adjusted oven set

temperature is reached. (See Fig. 3).

Notes: When used with a Cook Time or a Delay Start setting,

the Convection Convert feature will display a "CF" for check

food when the bake time is 75% complete (See Fig. 3). At this

time the oven control will sound 3 long beeps at regular intervals

until baking has finished. When the bake time has completely

finished the control will display "End" and will sound 3 long

beeps every 30 seconds until the pad is pressed (See Fig.

4).

The oven icon will show a rotating fan within the square. This

rotating fan icon indicates when the Convection Fan is operating

(See Figs 2 or3)

Press to cancel Convection feature at any time.

Note: The minimum amount of cook time using the Convection

Convert feature with a Cook Time or a Delay Start function is

20 minutes.

PRESS

'Xonv^

. Bake ^

i^'^Conv^

Convert

DISPLAY

:30 350‘

Fig.i

ilÉSiliHf

Fig. 2

■30 CF f®

Fig.3

•30 End

Fig. 4

To Set Add 1 Minute Feature

The keypad is used to set additional minutes to the Timer. Each time the pad is pressed, another minute is

added. If the Timer is not active and the key pad is pressed, the Timer feature will become active and will begin

counting down from 1 minute. When the Timer reaches the end of the set time, “End” will display and signal 3 long beeps

at regular intervals until (^1®} is pressed again.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Comments to this Manuals

No comments

Kenmore 790.7942 User Manual Page 28

Comments to this Manuals