Kenmore 3.6 cu. ft. Top-Load Washer w/ Deep Wash Cycle - White ENERGY STAR Owner's Manual download pdf (Page 12)

TRANSPORTING YOUR WASHER

1. Shut o both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

Winter Storage Care directions before moving.

3. Disconnect drain from drain system and drain any

remaining water into a pan or bucket. Disconnect drain

hose from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back

inside washer. If you do not have packing tray, place heavy

blankets or towels into basket opening. Close lid and place

tape over lid and down front of washer. Keep lid taped until

washer is placed in new location.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1. Refer to “Installation Instructions” to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

2. Plug in washer or reconnect power.

3. Run washer through Casual cycle to clean washer and

remove antifreeze, if used. Use half the manufacturer’s

recommended amount for a medium-size load.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

No comments

Kenmore 3.6 cu. ft. Top-Load Washer w/ Deep Wash Cycle - White ENERGY STAR Owner's Manual Page 12