Kenmore Coldspot 106 User Manual download pdf (Page 5)

AWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Before you move your refrigerator into its finai location, it is

important to make sure you have the proper eiectricai

connection:

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded

electrical supply is required, it is recommended that a separate

circuit serving only your refrigerator be provided. Use an outiet

that cannot be turned off by a switch. Do not use an

extension cord.

NOTE: Before performing any type of instailation, cleaning, or

removing a iight buib, turn the control, (Thermostat, Refrigerator

or Freezer Controi depending on the model) to OFF and then

disconnect the refrigerator from the eiectricai source. When you

are finished, reconnect the refrigerator to the eiectricai source

and reset the controi (Thermostat, Refrigerator or Freezer Controi

depending on the modei) to the desired setting.

To remove the base grille:

1. Open both refrigerator doors.

2. Place hands along the ends of the grille, with your thumbs

aiong the top. Push in with your thumbs and puii up on the

bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base griile

after cieaning.

To replace the base grille:

1. Open the doors.

2. Line up the griiie support tabs with the metal clips.

3. Push the griiie firmly to snap it into place.

1 2 3 4 5 6 7 8 9 10 ... 75 76

No comments

Kenmore Coldspot 106 User Manual Page 5