Kenmore ELITE 141.1668 User Manual download pdf (Page 11)

5. Place the Tank Pull-out Tray Kit on the Bottom

Shelf. Extend the Tank Tray outward from its

Bracket so you can align the holes on the Bracket

with the threaded holes on the top of Bottom Shelf.

Tighten securely by using 4 of the 1/4"x1/2" Phillips

Head Screws provided. See Fig. 4. Slide tray back

into Bracket.

6. Before installing the Door Bracket to the

inside of front Cart Side Panels be sure Door

Stops for Magnets on the Door Bracket are

located on the front side. See

Fig. 5.

7. Install the Door Bracket to the inside of front

Cart Side Panels. Align the threaded holes on

the Door Bracket with the holes on Cart Side

Panels. Tighten securely by using 4 of the

1/4"x50mm Phillips Head Screws provided.

See Fig. 5.

Figure 4 (LP gas model only)

CART SIDE

Installing The Cabinet Doors and Wire Basket

1. Remove the white protective film from the

stainless steel Door Panel and stainless steel

Door Axle Brackets.

2. Install the Door Axle Bracket-left bottom to

the Left Cart Side Panel. Insert Bracket upright

against Panel inside surface. Align Bracket and

Panel threaded holes. Thread two 3/16" x 9mm

Phillips Head Screws from the Panel front

through Bracket. See Fig. 6a. Tighten securely.

See Fig. 6b for correct assembly view.

3. Place the axle on bottom of the Left Door

Panel in the Door Axle Bracket-left bottom.

See Fig. 6b.

Figure 5

CART SIDE PANEL-LEFT

Figure 6a

Figure 6b

CART SIDE

-LEFT BOTTOM SHELF

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

No comments

Kenmore ELITE 141.1668 User Manual Page 11