Kenmore 46-73063 Owner's Manual download pdf (Page 38)

CONNECTING

THE

WATER

LINE

8. FLUSH OUT THE TUBING

Turn the main water supply on

and

flush out the tubing until the

water is

clear.

Shut the water off at the water

valve after about one quart of

water has been

flushed through

the tubing.

9. CONNECT THE TUBING

THE

REFRIGERATOR

NOTE:

• Before making the connection to the refrigerator,

be sure the refrigerator power cord is not

plugged into the wall outlet.

1. Remove the plastic flexible cap from the water

valve.

2. Place the compression nut and ferrule (sleeve)

onto the end

the tubing as shown.

Insert the end of the copper tubing into the

connection

far as possible. While holding the

tubing, tighten the fitting.

£ CAUTION: Check to see

leaks occur

water

line connections.

Ferrule

-=--+-~

(sleeve)

Refrigerator

Connection

£ CAUTION: Check to see

water dripping

occurs at water

line connections.

10. TURN THE WATER ON AT THE

SHUTOFF VALVE

Tighten

any

connections that leak.

11. PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that

does not

vibrate against the back

the refrigerator or

against the

wall. Push the refrigerator back

the wall.

12. START THE ICEMAKER

Set the icemaker power switch to the

(I)

position.

NOTE: A

newly installed refrigerator may take

several hours

start producing ice.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 139 140

Comments to this Manuals

No comments

Kenmore 46-73063 Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for Fridges Kenmore 46-73063