Kenmore 17602 Owner's Manual download pdf (Page 4)

4

IMPORTANT

Your old unit may have a cooling system that

used CFCs or HCFCs (chlorouorocarbons

or hydrochlorouorocarbons). CFCs and

HCFCs are believed to harm stratospheric

ozone if released to the atmosphere.

Other refrigerants may cause harm to the

environment if released to the atmosphere. If

you are throwing away your old unit, make

sure the refrigerant is removed for proper

disposal by a qualied technician. If you

intentionally release refrigerant, you may be

subject to nes and imprisonment under the

provisions of environmental legislation.

Electrical information

• The unit must be plugged into its own

dedicated 10 amp, 115 Volt, 60 Hz. AC

only electric outlet. The power cord of

the appliance is equipped with a three-

prong grounding plug for your protection

against shock hazards. It must be plugged

directly into a properly grounded three-

prong receptacle. The receptacle must

be installed in accordance with local

codes and ordinances. Consult a qualied

electrician. Do not use an extension cord

or adapter plug.

• Immediately repair or replace any power

cord that becomes frayed or damaged.

• Never unplug the appliance by pulling

on the power cord. Always grip the

plug rmly, and pull straight out from

the receptacle to prevent damaging the

power cord.

• Unplug the appliance before cleaning and

before defrosting to avoid electrical shock.

• Performance may be aected if the

voltage varies by 10% or more. Operating

WARNING

These guidelines must be followed to

ensure that safety mechanisms in this

unit will operate properly.

the unit with insucient power can

damage the motor. Such damage is not

covered under the warranty.

• Do not plug the unit into an outlet

controlled by a wall switch or pull cord to

prevent the appliance from being turned

o accidentally.

• Avoid connecting unit to a Ground Fault

Circuit Interruptor (GFCI).

Important Safety Instructions

Grounding type wall receptacle

Power cord with

3-prong grounded plug

Do not, under

any circumstances,

cut, remove,

or bypass the

grounding prong.

1 2 3 4 5 6 7 8 9 ... 39 40

Comments to this Manuals

No comments