Kenmore 141.17337 User Manual download pdf (Page 14)

7. Install the Door Bracket to the Inside of front

Cart Legs. Align the threaded holes on the Door

Bracket with the holes on Cart Legs. Tighten

securely by using 4 of the 1/4"x2" Pattern Head

Screws provided. (See Fig. 3. on page 11)

Upper door bolt holes (at ends of bracket) must

face outward.

Installing The Cabinet Doors

For LPG Gas grilis:

1. Install the Door Stops to the Bottom Shelf

and the Door Bracket. See Fig. 4a.

2. Align the holes on the Door Stops with the

threaded holes on the top of the Bottom Shelf

and bottom side of Door Bracket. Tighten

securely by using 4 of the 1/4"x1/2" Pattern

Head Screws provided. See Fig.4a.

3. Remove the white protective film from the

stainless steel Doors. Attach a Door Handle to

each Front Door by using 2 of the M4x5mm

Pattern Head Screws provided. See Fig. 4b.

Be careful not to scratch the Door surfaces.

4. When installing the Front Doors, make sure

the door bolt holes are located on the hinge

sides of the Cart Legs.

5. Install either Front Door by inserting 1/4"x5/8"

part-threaded bolt through the lower door bolt

hole of the Front Door and into the tapped

hole of the Bottom Shelf. Next, align the

upper door bolt hole of Front Door with the

tapped hole in the bottom of Door Bracket.

Insert 1/4"x1/2" partly-threaded bolt provided.

Tighten both bolts securely.

6. Repeat these steps to install the other Front Door.

7. Install the Cart Spice Basket to the inside of Left

Door. Align the threaded holes on the inside of Left

Door with the holes on the Cart Spice Basket.

Tighten securely by using 2 of the 1/4"x1/2" Pattern

Head Screws provided. See Fig.4b.

Figure 4a (LP gas model only)

Figure 4b (LP gas model only)

UPPER DOOR

DOOR

BRACKET

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Comments to this Manuals

No comments

Kenmore 141.17337 User Manual Page 14

Comments to this Manuals

Related products and manuals for Food processors Kenmore 141.17337