Kenmore 70089 User Manual download pdf (Page 21)

Operating Instructions

Before Turning Air Conditioner On

To operate air conditioner efficiently and ensure it

provides maximum comfort;

• Tightly close all doors and windows in area being

cooied.

• Keep air flow to or from unit free of obstructions. Do

not place plants, furniture, lamps, etc., in front of air

conditioner return air vent or air discharge vent.

• Keep outdoor louvers free of obstructions. Keep fins

on evaporator and condenser coils free of dirt and

debris.

• Clean air filter regularly.

NOTE: Clean air filter at least once a week during

continuous operation. More frequent cleaning may be

required in extremely dusty environments. NEVER

operate air conditioner with air filter removed.

• Plug power cord into appropriate receptacle only. See

Electrical Requirements on pages 6 and 7.

When area cools to desired temperature, fan speed can

be reduced for quieter operation. Compressor will

periodically cycle on and off to maintain room

temperature at selected level.

Smart Set Mode

To operate air conditioner in Smart Set mode:

1. Press SMART SET pad on control panel. Fan begins

operating at high speed and automatically switches

to medium, then low, speed as room air nears

desired temperature.

NOTE: Compressor lockout feature delays start of

compressor for 3 minutes after unit is plugged in,

or if restarted less than 3 minutes after last

compressor cycle.

Press \/ I pad to set temperature at desired

level of cooling.

After room reaches set temperature, fan continues to

run at low speed and compressor cycles on and off to

Normal Cooling Mode

Air conditioner is in “norma!” cooling mode whenever

LOW COOL, MED COOL, or HIGH COOL pads are

pressed and no other pad is pressed at same time. To

run air conditioner in normal cooling mode:

1. Press HIGH COOL pad on control panel. High fan

speed will cool area to desired temperature quicker

than slower speeds.

NOTE: Compressor lockout feature delays start of

compressor for 3 minutes after unit is plugged in,

or if restarted less than 3 minutes after last

compressor cycle.

2. Press \/ I /\ pad to set temperature at desired

level of cooling.

After room reaches set temperature, fan cycles on and

off with compressor. See POWER SAVER PLUS

description on previous page.

Fan Only Mode (No Cooling)

Use Fan Only mode for venting area of stale or smoky

air, removing odors, or simply circulating air without

cooling. Displays actual room temperature. To operate

air conditioner in Fan Only mode;

1. Open vent door by placing vent control in EXHAUST

position. Opening vent door allows indoor air to be

exhausted outside.

2. Select desired fan speed (low, medium, or high) by

pressing appropriate pad on control panel (LOW

COOL, MED COOL, or HIGH COOL).

3. Press FAN ONLY pad.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Kenmore 70089 User Manual Page 21

Comments to this Manuals

Related products and manuals for Conditioners Kenmore 70089