Kenmore 22352 Owner's Manual download pdf (Page 8)

5. Add fabric softener to dispenser

Pour a measured amount of liquid fabric

softener into dispenser; always follow

manufacturer’s directions for correct amount

of fabric softener based on your load size.

Dilute liquid fabric softener by lling the

dispenser with warm water until liquid reaches the underside

of the rim. See max ll line arrows.

IMPORTANT: The Rinse knob must be set to either One Rinse

with Fabric Softener or Two Rinses with Fabric Softener when

using fabric softener in the fabric softener dispenser. This

ensures that fabric softener is added at the correct time in the

rinse phase and is evenly distributed.

Adding Liquid Fabric Softener Manually to Wash Load

During the nal rinse, wait until the washer has completed

lling, then press the START/PAUSE/Unlock Lid button to pause

the washer. Lift the lid and add the measured recommended

amount of liquid fabric softener. Do not use more than the

recommended amount. Close the lid and press the START/

PAUSE/Unlock Lid button again to start the washer.

Liquid

Chlorine Bleach

4. Add liquid chlorine bleach

to dispenser

Do not overll, dilute, or use more than 1 cup (250 mL).

Do not use color-safe bleach or Oxi products in the same

cycle with liquid chlorine bleach.

Turn cycle knob to choose your wash cycle. For more

information, see “Cycle Guide”.

6. Select cycle

Load garments in loose heaps evenly

around basket wall. For best results, do

not pack the load tightly. Do not wrap

large items such as sheets around the

agitator; load them in loose piles around

the sides of the basket. Try mixing

dierent sized items to reduce tangling.

IMPORTANT: Do not tightly pack or force

items into washer. Items need to move freely for best cleaning

and to reduce wrinkling and tangling.

3. Load laundry into washer

MAX FILL

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

Kenmore 22352 Owner's Manual Page 8