Kenmore 31140 Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
CHECK BAG INDICATOR
When the vacuum cleaner is running with
normal air flow, the light on the CHECK
BAG indicator is o.
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain
attachments, due to reduced airflow
through attachment. No maintenance is
required.
The light comes on when:
Bag is full. See CHANGING DUST BAG
(page 15)
The airflow is blocked. Check motor
safety filter and other possible clog
locations shown in REMOVING CLOGS
.
(pages 19-20)
Kenmore
CHECK BAG
Indicator
- 10 -
Select a pile height setting by turning the
height adjust selector located on the
nozzle.
PILE HEIGHT SELECTION AND SETTINGS
Height Adjust
Selector
CAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time when
the agitator is turning. Damage to carpet
may occur.
Attention: Refer to your carpet
manufacturers cleaning
recommendations. Some more delicate
carpets may require that they be
vacuumed with the agitator turned off to
prevent carpet damage.
Suggested settings are:
NOTE: To protect bare floors and delicate
carpets, place the power switch in the
FLOOR
position to turn off agitator rotation.
HI – Shag, deep pile, or scatter rugs.
MED HI – Medium to deep pile.
MED LO – Low to medium pile.
LO –
The preferred setting for many carpets
and also for bare floors.
SUGGESTED PILE HEIGHT SETTINGS
There are four (4) pile height settings on
the vacuum cleaner. For best deep down
cleaning, use the LO setting. However, you
may need to raise the height to make
some jobs easier, such as scatter rugs and
some deep pile carpets, and to prevent
the vacuum cleaner from shutting o.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments