Kenmore 10135 Owner's Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
TO REMOVE CLOG FROM PET
HANDIMATE
Frequently check air
path to make sure it is
free of obstructions
TO REMOVE CLOG FROM HOSE
Frequently check air path to make sure it
is free of obstructions
TO REMOVE CLOG FROM FLOOR/TOOL
SELECTOR
Frequently check FLOOR/TOOLS selector
to make sure it is free of obstructions.
1.
Press tabs on FLOOR/TOOLS selector
cover and remove.
2.
Remove
FLOOR/TOOLS
selector and
clean any debris
or clogs located
in valve area.
3.
Reinstall
FLOOR/TOOLS
selector as
shown.
3.
Reinstall FLOOR/TOOLS selector cover.
Make sure tabs snap into place. A
noticeable click should be heard.
CAUTION
To reduce the risk of injury from
moving parts, remove Pet HandiMate
from vacuum hose or wand before
servicing.
REMOVING CLOGS
4. Plug in the vacuum cleaner and turn it
on.
5. Stretch the extension hose to maximum
length and then allow the hose to return
to its natural length.
6. Reinstall hose and wand onto vacuum
cleaner. See ASSEMBLY (pages 6).
1.
Press WAND
RELEASE button.
2.
Pull up to
release wand.
3.
Lift wand from
vacuum cleaner
- 20 -
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comments to this Manuals

No comments