Kenmore 10135 Owner's Manual download pdf (Page 15)

- 15 -

PRE-FILTER CLEANING

3. Replace the lower portion of the dust

cup by aligning marks as shown,

UNLOCKED (For Cleaning).

4. Rotate while pressing downward until

marks align as shown above in LOCKED

(For Use).

5. Reinstall the dust cup. See EMPTYING

DUST CUP (page 14).

The pre-filter is located inside the dust

cup. Check the pre-filter frequently and

clean when dirty.

1. Remove the dust cup as outlined in the

EMPTYING DUST CUP (page 14).

NOTE: Make sure dust cup is free of

debris before opening.

2. Rotate dust cup lid assembly

counterclockwise as indicated on the lid

and lift off.

3. Grasp pre-filter

and rotate as

shown to remove.

4. Clean pre-filter

by gently tapping

over a trash

container. Tap on

several sides to

ensure best

cleaning.

If necessary, rinse with cold water only,

DO NOT use detergent or soap. Allow

parts to dry 24 hours before putting back

into vacuum cleaner.

DO NOT wash in the dishwasher.

DO NOT install damp.

To Reinstall:

1. Align the

slots on the pre-

filter with the

alignment tabs

inside dust cup

lid assembly.

2. Rotate pre-filter

as shown to lock in

place.

Tabs

Slots

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comments to this Manuals

No comments

Kenmore 10135 Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Vacuum cleaner supplies Kenmore 10135