Kenmore 76989 Installation Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
INSTALLATION INSTRUCTIONS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied (not shown to scale)
Location Requirements
The microwave oven may be installed over a built-in wall oven. If
installing over a built-in oven, make sure there is a minimum
of 3"
(7.6 cm) between the top of the lower oven
cutout and the
microwave oven cutout oor.
The microwave oven may also be installed in a cabinet by itself
(without a built-in oven below). For best usability, we recommend
a minimum distance of 36" (91.4 cm) from
the oor to the microwave
oven cutout floor.
Make sure the surrounding cabinetry has clearance to open and
close freely. Allow a clearance of at least 1
9/16 " (4. 0 cm) below the
cutout oor (3" [7.6 c
m] for installation above a built-in oven), and
a clearance of at least 2" (5.1 cm) above the cutout opening.
Required Cutout Dimensions
NOTES:
Height dimension is
critical:
17" (43.2 cm) minimum, 17
1/8"
(43.5 cm) maximum.
Width and depth measurements have ±1/16" (2 mm)
tolerance.
3" (7.6 cm) minimum dimension is from lower oven cutout
ceiling to microwave oven cutout oor.
Trim kit frame extends 1
1/16
" (2.7cm) above and below the
cutout opening.
Trim Kit Frame Dimensions
Measuring tape
Pencil
Phillips screwdriver
Drill
7/64" drill bit
A. Upper cabinet
B. Microwave oven cutout
C. Lower oven cutout
D. Lower cabinets
E. Floor
3"
(7.6 cm)
B
B
D
36"
(91.4 cm)
C
2"
(5.1 cm)
2"
(5.1 cm)
1
"
(4.0 cm)
A
E
A
.
T
r
im
k
it
f
r
a
me
ov
e
r
ha
n
g
B
.
C
utout for lower o
v
en
22 3/4"
(57.8 cm)
WidthWidth
23
1/8
" (58.7 cm)
3"
(7.6 cm)
A
1
1/16"
(2.7 cm)
1
1/16
"
(2.7 cm)
B
(43.5 cm)
max.
17" (43.2 cm)
min.
EN-2
*30 ( 76.2 cm ) trim kit"
*
29
3/4
" (75.6cm)
3
7/18
" 8.1c
23" 58. 4cm)
12 "
(30.9 cm
)
1 3/16 "
3.0 cm
19
1/11
"
(48.5 cm)
3
9/17 "
(8.8 cm)
Rear duct Bottom duct Rails (2)
Short screws (20)
(17 + 3 extra)
Long wood screws
(6 - painted) (4 + 2 extra)
Trim kit frame
9/16
17
1/8
"
The insulating
strip
m)(
(
( )
Note: The Rear duct is only to be used with microwave model: 204.77603610
Page view 3
1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments