Kenmore Smart Connected Water Heater Module FAQs
Where does the Kenmore Smart water heater module get installed?
On standard electric water heaters, the module will be installed into a connector
on the top of the heater
On heat pump water heaters, the module
will be installed into a connector on
the front control panel.
Please refer to the Quick Start & Install guide included with the Smart module for
proper installation
What are the different modes that can be set in the app or on the water
heater control?
Standard Electric Models
Standard mode
This is the default mode, using the heating elements for bringing the tank
temperature up to the set point.
Energy Saver mode
Energy Saver mode will automatically adjust the water heater's temperature set
point to match your home's usage patterns.
Vacation mode
Maintains a 60°F tank temperature. This mode is recommended when the water
heater is not in use for a long period of time, to minimize energy consumption
and prevent the water heater from freezing during cold conditions.
Heat Pump Models
Efficiency mode
Provides the highest efficiency and lowest cost operation by using only the heat
pump for heating. Recovery time and efficiency will vary with ambient
temperature and relative humidity.
Hybrid mode
The default, recommended setting, combining high energy efficiency with
reduced recovery time.
Electric mode
Functions as a conventional electric unit, relying on only the heating elements for
water heating.
Vacation mode
Maintains a 60°F tank temperature. This mode is recommended when the water
heater is not in use for a long period of time, to minimize energy consumption
and prevent the water heater from freezing during cold conditions.
Can I schedule the water heater to go into vacation mode?
Comments to this Manuals