Kenmore 385.11703 User Manual download pdf (Page 18)

WARNING:

The needle and take-up lever moves up and

down while winding the bobbin.

Keep fingers away from all moving parts.

Special care is required around the sewing

machine needle.

To avoid possible injury, do not touch any

moving parts

Draw thread from the spool.

Guide the thread around under the thread

guide. Draw out the thread from the notch and

pass it under the disk,

(D Thread guide

(2) Notch

(D Disk

Thread through the hole in the bobbin from the

inside to the outside.

Put the bobbin on the bobbin winder spindle,

® Bobbin winder spindie

Push the bobbin to the right

With the free end of the thread held in your

hand, depress the foot switch.

After the bobbin has wound for about 10

seconds, stop the machine and cut the thread

close to the hole in the bobbin.

Depress the foot switch again,

When the bobbin is fully wound, it stops

automatically.

Return the bobbin winder to its original

position by moving the spindle to the left, and

cut the thread,

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

No comments

Kenmore 385.11703 User Manual Page 18