Kenmore ELITE 795.7105 User Manual download pdf (Page 13)

REFRIGERATOR INSTALLATION

REMOVING AND REPLACING

REFRIGERATOR DOORS

To remove the left refrigerator door:

On the back of the refrigerator, press back on the

release ring of the fitting (see 3 in figure below) and

pull out the water tube in the direction of the arrow.

A CAUTION; Before you begin, remove food and

bins from the doors.

1. Open the door.

Remove the top hinge cover screw (1).

2. Use a flat-head screwdriver to pry back the hooks

(not shown) on the front underside of the cover

(2). Lift up the cover.

3. Remove the cover. Pull out the tube (3).

4. Disconnect all the wire harnesses (4).

5. Remove the grounding screw(5).

6. Rotate hinge lever (6) counterclockwise. Lift the

top hinge (7) free of the hinge lever latch (8).

A CAUTION; When lifting the hinge free of the latch,

be careful that the door does not fall forward.

7. Lift the door from the middle hinge pin and remove

the door.

8. Place the door, inside facing up, on a

nonscratching surface.

To remove the right refrigerator door:

screw (1). Lift up the cover (2).

2. Remove the cover.

3. Rotate the hinge lever (3) clockwise. Lift the top

hinge (4) free of the hinge lever latch (5).

A CAUTION; When lifting the hinge free of the latch,

be careful that the door does not fall forward.

A WARNING

Electrical Shock Hazard

' Disconnect electrical supply to the refrigerator

before installing. Failure to do so could result in

death or serious injury.

' Do not put hands or feet or other objects into the

air vents, base cover, or bottom of the

refrigerator. You may be injured or receive an

electrical shock.

' Be careful when you work with the hinge, base

cover, and stopper. You may be injured.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Comments to this Manuals

No comments

Kenmore ELITE 795.7105 User Manual Page 13

Comments to this Manuals

Related products and manuals for Refrigerators Kenmore ELITE 795.7105