Kenmore 790.4999 User Manual download pdf (Page 8)

To Remove and Replace Warmer Drawer

To Remove Warmer Drawer:

1. Turn power oﬀ before removing the warmer drawer.

2. Open the drawer to the fully opened position.

3. Locate the latches on both sides of the warmer drawer.

4. Pull up on the left glide latch and push down on the right glide

latch.

5. Pull the drawer away from the appliance.

6. To clean warmer drawer, gently scour with a soapy scouring pad;

this will remove most spots. Rinse with a 1:1 solution of clear water

and ammonia. If necessary, cover diﬃ cult spots with an ammonia-

soaked paper towel for 30 to 40 minutes. Rinse with clean water

and a damp cloth. Remove all cleaners or the porcelain may

become damaged during future heating. DO NOT use spray oven

cleaners on the cooktop.

To Replace Warmer Drawer:

1. Align the glide latches on both sides of the drawer with the slots on

the drawer.

2. Push the drawer back into the appliance.

Turn the warmer

drawer control knob to OFF

before removing the drawer. DO

NOT touch the warmer drawer

element. The element may still be

hot enough to cause burns, even

if it is dark in color.

Electrical Shock Hazard can occur and

result in serious injury or death. Disconnect appliance

from electric power before cleaning and servicing the

warmer drawer.

Warmer Drawer

Avoid Service Checklist

Before you call for service, review this list. It may save you time and

expense. The list includes common occurrences that are not the result

of defective workmanship or materials in this appliance.

General Cleaning (continued)

OCCURRENCE POSSIBLE CAUSE/SOLUTION

Drawer is not level. Poor installation. Place a level on the cutout bottom. Make sure bottom is level.

Be sure cutout bottom is strong and stable enough to adequately support

drawer (and wall oven, if applicable).

Cannot move appliance

easily. Appliance must be

accessible for service.

Cabinets not square or are built in too tightly. Contact builder or installer to

make appliance accessible.

Warmer drawer does not

operate.

Make sure cord/plug is plugged tightly into outlet.

Service wiring is not complete. Contact Sears or another qualiﬁ ed servicer.

Power outage. Check house lights to be sure. Call your local electric company

for service.

An error at power up (or after a power failure) could happen if the control

knob was left on the ON position. If a power failure should occur, be sure to

set the control knob to the OFF position. This will reset the electronic controls.

Once the control knob has been set to the OFF position, the electronic controls

should return to normal operation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Kenmore 790.4999 User Manual Page 8

Comments to this Manuals

Related products and manuals for Garden tools Kenmore 790.4999