Kenmore 68133 Owner's Manual download pdf (Page 6)

Towels and

bedding

Santize*

Wrinkle Guard™

Cycle Signal

Extended high-heat drying cycle intended

to help sanitize items such as bedding and

towels. This cycle is not recommended for

all fabrics. For best results, run cycle to

completion, do not interrupt.

NOTE: Steam portion of Wrinkle Guard™

w/Steam option is disabled for this cycle.

Jackets,

comforters, pillows

Bulky/

Bedding

Damp Dry Signal

Wrinkle Guard™

Cycle Signal

Use for drying large, bulky items; do not

overfill dryer drum.

Heavyweight items

such as towels and

jeans

Heavy

Duty

Damp Dry Signal

Wrinkle Guard™

Cycle Signal

Use for drying large or heavy items.

Corduroys, work

clothes

Normal Damp Dry Signal

Energy Saver

Wrinkle Guard™

Cycle Signal

Medium to large loads of mixed fabrics

and items.

No-iron fabrics,

cottons, perm

press, linens,

synthetics

Casual Damp Dry Signal

Energy Saver

Wrinkle Guard™

Cycle Signal

For normal light- to medium-weight

fabrics. Drying time varies based on

fabric type, load size, and dryness setting.

Lingerie, blouses,

washable knit

fabrics

Delicates Damp Dry Signal

Energy Saver

Wrinkle Guard™

Cycle Signal

For gently drying delicate items.

Items to dry: Cycle: Dry Temp: Dry Level

†

: Available

Options:

Cycle Details:

SENSING CYCLES – Senses moisture in the load and shuts o when the load reaches the selected dryness level. Settings shown are

default settings for that cycle.

To get the most energy savings and enhanced fabric care from your dryer use the Sensing cycles. These cycles measure the drying

air temperature and moisture levels to turn the dryer o once the load reaches the selected dryness level. Dryer performance and

results may vary with service voltage less than 240.

Wrinkle Guard™ or Wrinkle Guard™ w/Steam

option (depending on model)

When you are unable to remove a load of clothes from

the dryer as soon as it stops, wrinkles can form. The

Wrinkle Guard™ option periodically tumbles, rearranges,

and us the load to help keep wrinkles from forming.

The Wrinkle Guard™ w/Steam setting (depending on

model) will add a short steam cycle after 60 minutes to

help smooth out wrinkles.

Get up to 150 minutes of heat-free, periodic tumbling

at the end of a cycle. Touch the WRINKLE GUARD™

option to select ON or OFF at any time before the

cycle has ended.

NOTE: If you open the dryer door prior to the end of

the Wrinkle Guard™ option, the dryer will go into Pause

mode. You will need to touch Power to turn o or touch

Start/Pause to continue Wrinkle Guard™ option.

Damp Signal

Touch to select the Damp Signal to on or o. When

selected, a series of beeps will sound when the load is

damp, but not completely dry. This will allow you to take

clothes out of the load that do not need to dry completely.

This option is not available on Sanitize, Steam Refresh,

and the Timed cycles.

CYCLE STATUS LIGHTS

The indicator bar on the right side of the control will let you

know what stage of the drying cycle is in process.

Check Vent

The Check Vent indicator will light if there is a blocked

vent or low airow.

Damp

This indicator shows that the load is partially dried

and items that you may wish to hang up or iron while

still damp may be removed.

Cool Down

The dryer has nished drying with heat, and is now

tumbling the load without heat to cool it down and

reduce wrinkling.

Complete

This will indicate that the selected cycle has ended and

the load may be removed from the dryer. If Wrinkle

Guard™ option has been selected, the dryer may continue

to tumble the load, even if the Complete indicator is lit.

Wrinkle Guard™

This indicator will light if the Wrinkle Guard™ option has

been selected and is running. The dryer will periodically

tumble the load for up to 150 minutes after the cycle has

ended.

Check Lint Screen

The Check Lint Screen indicator light will ash as a

reminder to clean the lint screen. It will ash until the

door is opened or a cycle is started. It will turn o when

the dryer is turned o.

START/PAUSE BUTTON

Touch and hold START/PAUSE button for up to 3 seconds

or until the dryer starts to begin the selected cycle; touch

again to pause a cycle.

†

If loads do not seem as dry as you would like or are drier than you would like, select More Dry or Less Dry next time you dry

a similar load.

* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all

fabrics. For best results, this cycle should be run to completion to ensure sanitization. Do not interrupt cycle.

CYCLE GUIDE –

SENSING

CYCLES

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Comments to this Manuals

No comments

Kenmore 68133 Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Electric laundry dryers Kenmore 68133