Kenmore 3405602 User Manual download pdf (Page 10)

B. INSTALL LEVELING LEGS

12

or your Benefit

Leveling your dryer correctly will

reduce operating noise and provide

improved drying performance.

STEP 1. Take two of the cardboard

corners from the carton. Place them on

the floor in back of the dryer.

STEP 2. Firmly grasp the body of the

dryer (not the top or console panel).

Gently lay dryer on the cardboard

corners.

STEP 3. With one of the legs in hand,

check the ridges for a diamond marking.

STEP 4. Start to screw the legs into the

holes by hand. Use a wrench to finish

turning the legs until diamond marking

is no longer visible. This is when we

recommend you start checking the

dryer for levelness. Further adjustment

may be necessary.

STEP 5. Now stand the dryer up and

move it close to its final location. Leave

enough room to connect the exhaust

vent.

STEP 6. Check levelness of dryer by

placing a level on top of the dryer, first

side-to-side; then front-to-back.

STEP 7. If dryer is not level, prop the

dryer up using two stacked cardboard

corner posts. Use a wrench to adjust

the legs up or down.

NOTE: It may be necessary to level

the dryer again after it is moved into

its final position.

lO

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Comments to this Manuals

No comments