Kenmore ELITE 790.99613 User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
The TIMER and FLEX CLEAN pads control the Continuous Bake or 12 Hour Energy Saving features. The oven
control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven controi is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
Setting Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
1.
2.
3.
Press and hoid for 7 seconds (Figurel). After 7 seconds "12h" or
-h" wili appear in the display and the control will beep once.
Press to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode and
-h" indicates the control is set for the Continuous Bake feature (Figure
3).
Press to accept the change (Figure 4; display will return to
PRESS
p'imerA fnr 7
seconds
DISPLAY
time of day) or press (stopI to reject the change
or (STOP
Setting Kitchen Timer Figure 4
The TIMER pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that
will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
INSTRUCTIONS
To set the Kitchen Timer (example for 5 minutes)
1. Press will appear and "TIMER" will flash in the display
(Figure 5).
2. Press the number pads to set the desired time in the display
(example (^5^). Press The time will begin to count down
with "5:00" and "TIMER" will stay in the display (Figure 6). Note: If
is not pressed the timer will return to the time of day after 25
seconds.
3. When the set time has run out, "End" and "TIMER" will show in the
display (Figure 7). The clock will sound with 3 beeps every 5
seconds until is pressed.
To cancel the Kitchen Timer before the set time has run out
Press The display will return to the time of day.
PRESS DISPLAY
Figure 5
c-nn
J-UU
Figure 6
£ nd
Figure 7
To Set Add 1 Minute Feature
The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the pad is pressed, 1 minute is
added to the Kitchen Timer feature if fhis feature is already active. If the Kitchen Timer feature is not active and the
pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.
16
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 44 45

Comments to this Manuals

No comments